FX921V-AS08 Kawasaki Engine - Parts

This O-ring, also known as a round seal, is an authentic OEM part used in lawn and garden equipment. It is a small, circular, rubber ring that helps create an airtight seal between the oil filter filler and engine to prevent leaking and ensure adequate lubrication. It is common for the O-ring to become brittle and lose its elasticity due ...Read moreto aging, and exposure to chemicals and high temperatures in the equipment. If an O-ring fails, it can result in oil leakage, leading to reduced equipment performance, and potential damage to the surrounding components. Carefully the oil ring off the sealing surface and clean the area thoroughly to ensure a proper seal for the new O-ring. Lightly lubricate the new O-ring and press it on to the sealing surface.

This is half of a collet. You will need to order two to receive a whole collet.

This is an authentic replacement part manufactured for use with Kawasaki small engines. The flanged hex head bolt is used with several models of engines and has multiple applications. This bolt can be used to secure the fan housing or oil pump cover and is sold as an individual replacement part.

This is a original Kawasaki replacement part made for use with small engines. The purpose of this bolt is to secure fan housing. It is a hex head bolt and it is sold individually. Replacing this bolt you should use a properly sized socket wrench.

This voltage regulator is a white, 4.5 x 2.5 inch, manufacturer-certified part. It is individually sold, and electrical in nature. It can be installed using a screw driver, and is rated as Easy to repair. It attaches close to the stator and maintains voltage to the battery. If damaged, it may cause components such as the fuel pump, ign...Read moreition system, or other electrical parts to not function properly. The engine may start sputtering, have a rough idle, or poor engine performance. This means the part can no longer maintain voltage, and must be replaced. Consult your owners manual, model number or wiring diagram to ensure you are choosing the correct product.

This is an OEM part sourced directly from the manufacturer. The muffler gasket is commonly found in Kawasaki engines. This part is placed to seal the connection with the muffler and prevent inadvertent leakage. You may require a wrench when replacing this item. The muffler gasket is available as an individual replacement part.

This is an authentic Kawasaki replacement part, sourced from the original manufacturer for use with small engines. The metal woodruff key is used to link a shaft and rotating gear to allow the gear to rotate with the shaft. This woodruff key is available as an individual replacement part, please see model diagram for associative parts.

This replacement nut is sourced directly from the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. It is standard hardware which has multiple applications, please refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality hex nut is made of durable metal and is sold individually.

This charging coil generates electrical power to support battery charging and electrical system operation. Built for dependable output, it helps ensure consistent performance during use.