FX751V (AS07) Kawasaki Engine - Parts

This is a genuine manufacturer-sourced part which is designed for Kawasaki engines that are commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make ...Read moresure to check the appropriate diagrams for your model for the correct location and application of this hardware. Pliers might be needed to secure or remove it.

This bolt is generally used to secure muffler on engines. It is supplied from original equipment manufacturer for use with Kawasaki gas powered engines. This bolt has a hex head which requires a wrench for installation. Please note it is sold individually.

This is an authentic Kawasaki replacement part manufactured for use with small engines. The float valve is used to prevent fuel from entering the float bowl when it is full, then allows fuel into the bowl when the fuel is drained from the float bowl. This float valve is sold as an individual replacement part, please see model diagram for associative parts.

This flanged bolt is a genuine OEM steel fastener used to secure various components in outdoor power equipment. It features a flange base that acts as a built-in washer to distribute the load and prevent damage to the material it is fastened to. The bolt head has a diameter of 6mm, and the bolt shaft has a thread pitch of 20. The bolt can...Read more corrode and crack over time, or its threads may wear down, leading to loosening or detachment of the connected parts. You will likely note excessive noise, vibrations, and equipment instability. Inspect all the bolts in your equipment and replace those that are no longer functioning. Use a wrench or socket to loosen and remove the old bolt. Position the new bolt on the mounting surface and tighten it securely until the flange is flush against the surface. Each flanged bolt is sold individually.

This o-ring provides an air-tight seal for the spacer, please make sure to check appropriate diagrams for correct location and use of this item. It is a high quality OEM sourced replacement o-ring that is designed for use with Kawasaki engines. Over time these rubber parts tend to get compressed become brittle and crack eventually requiring replacement. Please note one durable rubber o-ring is included per order.

This OEM Pin is a silver, metal, individually sold part. It is installed with a hammer and punch and is rated as a challenging repair by customers. It attaches to the oil pump shaft, and if broken you will hear an abnormal noise coming from the pump area. If damaged, the part should be replaced. Refer to your owners manual or model number to ensure you are choosing the correct part.

This item is supplied directly from the original equipment manufacturer for use with Kawasaki engines that are commonly installed on a variety of lawn and garden equipment. It is the special gasket that helps to provide an air-tight seal for the float chamber assembly. Over time the material may wear out and begin to crack eventually requ...Read moreiring a replacement. This high-quality gasket is made of durable rubber and is sold as an individual component. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct installation of this part. You will need a wrench set and a screwdriver to take the carburetor apart when replacing this gasket.