My Orders
FMR14 Electrolux Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer wouln't start
7 of 11 people
found this instruction helpful.
-
Ivette from Grand Island, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
First I removed the clamp, pulled out the part, and diconnected the two wires on the side and a small screw. Reconnected the new part with the small screw, connected the wires and plugged the part back to the side of the motor. Whaa La, Done.
Was this helpful?
Thank you for voting!
Freeze would not re-start after temp rose above 23 degrees.
2 of 2 people
found this instruction helpful.
-
Andy from GOOSE CREEK, SC
- Really Easy
- 15 - 30 mins
-
Screw drivers
Unplugged the freezer. Located the Run Capacitor (next to the compressor). Removed the wire holding bracket, removed the Run Capacitor from the Start Relay. Installed the NEW Capacitor, re-installed the holding bracket. Plugged the unit in, looking at the display for the proper start-up sequence data. All is good - freezer operating for a
... Read more
nother 10+ yrs. NOTE: When removing the Run Capacitor, beware the COMPRESSOR could be HOT to the touch.
Read less
Was this helpful?
Thank you for voting!