FLF337ECP Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken control panel housing
-
Marc from Gastonia, NC
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
I actually had to buy two parts, the cover and the control panel. But unfortunately I could not get them from the same place. But I replaced the control panel and the cover in about 15 minutes. No issues. Everytihg lokks brand new and works like a new stove. So I am very pleased.
Was this helpful?
Thank you for voting!
old oven racks were nasty!
-
Richard from Fort Wayne, IN
- Really Easy
- Less than 15 mins
We recently purchased condo and WhiteWestinghouse range needed some love. the old racks were not in very good shape so we ordered new.
Was this helpful?
Thank you for voting!
I needed an extra oven rack to bake more at one time.
-
Sally from Cincinnati, OH
- Really Easy
- Less than 15 mins
I just installed the extra rack and re-arranged the existing ones. Works great!
Was this helpful?
Thank you for voting!
Old rusty worn out oven racks
-
June from Mt. Vernon, AL
- Really Easy
- Less than 15 mins
Removed the old oven racks and put in the new ones.
Was this helpful?
Thank you for voting!
Needed to install an anti-tip bracket on my stove.
-
Daniel from Provo, UT
- Really Easy
- Less than 15 mins
-
Socket set
Moved the stove. Used the template to position the bracket. Put the supplied screws to attach bracket to the floor. Slid stove back into place. DONE!
Was this helpful?
Thank you for voting!
Just had to replace the racks in the stove.
-
charles from El Paso, TX
- Really Easy
- Less than 15 mins
Did just want to comment on the customer service. It was great. The easiest to order that I have ever dealt with. Received prompt attention to the order and processing the same. JUST GREAT> Thanks
Was this helpful?
Thank you for voting!
Sliced Outlet Cord
-
William from Saint Clair Shores, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
I was replacing a range oven hood, so I pulled the oven away from the wall but left it plugged in. I removed the old oven hood, which had an exhaust pipe that was still mounted through the cupboard. While I was preparing the new oven hood the exhaust pipe fell out of the cupboard and cut the oven wire in half. I was able to find the part
... Read more
number on the existing cord and looked up on line. I ordered the part using 3-5 business days and it showed up in 2 days. I was able to attach the new cord, which had an easy clip plug, and secure back to the stove. Very easy and very inexpensive to do.
Read less
Was this helpful?
Thank you for voting!
55 yr old wall oven had burnt out seal
-
Diane from Natrona Heights, PA
- Really Easy
- Less than 15 mins
Very easy--just had to drill new holes for the clips because the are already pre set in the rubber gasket
Was this helpful?
Thank you for voting!
Gasket In Door Replaced
-
James from Greenville, TX
- Really Easy
- Less than 15 mins
The gasket just snapped in place. The first one I ordered was, my fault, the wrong one and I returned it and got the correct one two days later.
Was this helpful?
Thank you for voting!
really bad ugly streaks inside of glass
-
John from Hemet, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
open door,throw the door latches at the hinges and remove door. Take the out of the outer panel so you can separate the glasses. remove clip that hold the outer glass in place. I ordered a replacement glass as I never thought that it would come clean it looked so bad, but it cleaned up like new so I now have a spare glass for my oven door
... Read more
. Just reverse the way you take it apart to put it back together.
Read less
Was this helpful?
Thank you for voting!
The oven control board did not respond and was kicking out the GFI
-
MELVIN from ST LOUIS, MO
- Really Easy
- 15 - 30 mins
-
Screw drivers
I replaced the oven control board. I used the old overlay because I could not find a model # but I was able to locate the exact replacement part. it took some to find, but it paided off.Thanks for your help. I Got the replacement part # from the old control board.
Was this helpful?
Thank you for voting!
Oven Temperture probe.
-
Kenneth from Edgemount, SD
- Really Easy
- 15 - 30 mins
-
Pliers, Socket set
Would have been simple if Frigidare had not changed the plastic snap wire connector on the part. The replacement part had a different snap together wire connection. After a couple of phone calls stating that the new part and the old part had different part numbers was informed that you have to snip off the ends and use wire connects but
... Read more
it was the right part. Once I knew that it was a simple repair if you have the wire connects to connect the wires.
Read less
Was this helpful?
Thank you for voting!
The Oven ignitor did not turn spark for the oven to turn on and heat up.
-
Ricardo from Brooklyn, NY
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I pulled the top cover from inside the oven off and unscrewed 2 screws to remove the heat plate. After i unplugged the adapter for the old ignitor apart and unplugged 2 wires and removed 2 screws that hole the ignitor to the plate. i replaced with the new ignitor, screwed back in place , plugged the 2 wires and the adaptor plug in and i
... Read more
was done , in less that 30 mins.. I also saved $180 (Sears $260) on this do it yourself repair.. Thanks PartSelect for having the part in stock.... R Diaz (Bklyn N.Y.)
Read less
Was this helpful?
Thank you for voting!
electronic temp controller went bad
-
david from reynoldsville, PA
- Easy
- 15 - 30 mins
-
Nutdriver
first unplug oven. then remove upper back panel(6 screws)with a 1/4 nut driver. next unplug electical connector from control unit. then remove unit by removing (4 screws on corners of unit with 1/4 nut driver. replace unit with new one and reassemble in reverse order.
Was this helpful?
Thank you for voting!
oven wouldn't work
-
Steve from Hiram, OH
- Easy
- 15 - 30 mins
-
Nutdriver
Pulled stove away from the wall and unplugged it. Removed probe and cut the wires because the connection clip on the new probe was different from the original. Leave the wires as long as possible because you will need the extra length to splice the clip from the old probe to the wires on the new one. Replaced probe and plugged the oven ba
... Read more
ck in. Done.
Read less
Was this helpful?
Thank you for voting!