FH641V (GS21) Kawasaki Engine - Parts

A muffler gasket, also known as an exhaust gasket, is a seal between the exhaust manifold and muffler within an engine, and it is used to reduce vibrations and noise, and prevent exhaust leaks. This gasket is sold as an individual part and is designed for use within lawn mowers, tractors, and various other types of engines. If you notice ...Read moreor smell fuel, increased noise or vibrations, and/or black carbon buildup around the gasket, muffler, or exhaust, then the muffler gasket is likely worn down or damaged and in need of replacing. Regular maintenance and inspections can prevent further any further damage, and help you identify issues earlier. To replace this gasket, you will likely need a socket wrench and screwdriver to remove the muffler and replace the gasket.

This Nut is a black, metal, individually sold part. Certified by the original equipment manufacturer, it can be installed with a wrench or socket and torque wrench by torquing to the manufacturer specficiations, and is rated as Easy to install by customers for multiple applications on different equipment. If damaged, the threads will be...Read more damaged or the edges will be rounded off, and it must be replaced. Refer to your owners manual to see if this part is right for you.

It is a genuine OEM sourced replacement part that is specially produced for use with Kawasaki engines commonly installed on lawn and garden equipment. This item fits the opening in the crankcase helps to provide an air tight seal to prevent any leaks. Over time seals tend to get compressed and may begin to crack eventually requiring repla...Read morecement to maintain peak performance. It is made of durable rubber material and it is sold individually.

This is a original Kawasaki replacement part made for use with small engines. The purpose of this bolt is to secure fan housing. It is a hex head bolt and it is sold individually. Replacing this bolt you should use a properly sized socket wrench.

It is an authentic item that is supplied by original equipment manufacturer for Kawasaki engines. This replacement screen is secured to the fan housing helping to protect the fan from dirt and debris. It is made with durable high quality plastic and it is sold individually, please note the hardware to secure it is all sold separately.

This voltage regulator is a white, 4.5 x 2.5 inch, manufacturer-certified part. It is individually sold, and electrical in nature. It can be installed using a screw driver, and is rated as Easy to repair. It attaches close to the stator and maintains voltage to the battery. If damaged, it may cause components such as the fuel pump, ign...Read moreition system, or other electrical parts to not function properly. The engine may start sputtering, have a rough idle, or poor engine performance. This means the part can no longer maintain voltage, and must be replaced. Consult your owners manual, model number or wiring diagram to ensure you are choosing the correct product.

It is a genuine item that is supplied by the original equipment manufacturer for use with Kawasaki engines that are commonly installed on lawn and garden equipment. The coil-charging helps to transfer the electric current. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Make sure to refer to the...Read more appropriate diagrams for your model to ensure the exact location and the correct repair procedure. Note, this high-quality coil-charging is sold individually. A screwdriver and a wrench set will be needed to replace this component.

It is a genuine item that is supplied directly from original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. This replacement plug can be removed to drain the oil from the engine. It is made of durable gray plastic and it is sold individually.

A genuine item that is supplied directly from the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. It is a special screw for the armature, make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality hex socket screw is sold individually.

The stud goes between the hex nut and the engine shroud. This is a genuine replacement part sourced from the original manufacturer for use with engines made by Kawasaki and Toro. It is made of metal and is available as an individual replacement part. A wrench may be necessary during the installation of this item. This part may become bent or broken and will need to be replaced.

This replacement part is sourced directly from original manufacturer and it is commonly used on Kawasaki small engines. This bolt has multiple uses depending on your model. Please refer to diagrams for correct application. It is a standard torx screw/bolt which needs a torx screwdriver to install or remove it. Includes one (1) bolt per order.

This is an OEM part sourced directly from the manufacturer. The valve is commonly found in Kawasaki small engines. This part is made of metal, and is used to control the flow of air in the engine, allowing exhaust air to flow into the air cleaner element. You may require a wrench when replacing this item. This part is sold individually.