FH641V (FS21) Kawasaki Engine - Parts

This is an authentic Kawasaki replacement part that has been sourced from the original manufacturer to be used with small engines. The cylinder head is used to cover the end of the cylinder and to provide a surface to allow the piston to compress the cylinder's contents. This item is available as an individual replacement part.

This bolt is generally used to secure muffler on engines. It is supplied from original equipment manufacturer for use with Kawasaki gas powered engines. This bolt has a hex head which requires a wrench for installation. Please note it is sold individually.

The valve spring retainer goes between the spring and the collet. This part is made of metal and is available individually. It is an OEM from Kawasaki, Toro, and Lawn Boy for use in engines. A screwdriver, a socket set, and a wrench set might be helpful during the installation of this part. This item will need to be replaced if it breaks.

This flanged bolt is a genuine OEM steel fastener used to secure various components in outdoor power equipment. It features a flange base that acts as a built-in washer to distribute the load and prevent damage to the material it is fastened to. The bolt head has a diameter of 6mm, and the bolt shaft has a thread pitch of 20. The bolt can...Read more corrode and crack over time, or its threads may wear down, leading to loosening or detachment of the connected parts. You will likely note excessive noise, vibrations, and equipment instability. Inspect all the bolts in your equipment and replace those that are no longer functioning. Use a wrench or socket to loosen and remove the old bolt. Position the new bolt on the mounting surface and tighten it securely until the flange is flush against the surface. Each flanged bolt is sold individually.

This is an authentic Kawasaki replacement part manufactured for use with small engines. The float valve is used to prevent fuel from entering the float bowl when it is full, then allows fuel into the bowl when the fuel is drained from the float bowl. This float valve is sold as an individual replacement part, please see model diagram for associative parts.

This is a genuine manufacturer supplied replacement component. It is specially produced for use with Kawasaki engines commonly installed on a variety of lawn and garden equipment. The filter helps to ensure that the air that goes through the unit is free of dust and other harmful contaminants. It can over time get clogged or damaged event...Read moreually requiring a replacement. Keep in mind it is made of high-quality material and is sold as an individual item. Refer to the owner's manual for the correct application and replacement procedure.

This is a genuine replacement part manufactured for use with Kawasaki small engines. The air filter prevents dust and debris from entering the intake manifold. Debris inside the engine can severely damage the engine and can eventually seize up the engine. Replacing worn or damaged filters is part of normal maintenance and can contribute t...Read moreo the engine's performance. This air filter element is sold as an individual replacement part.

This authentic manufacturer-supplied component is made for Kawasaki engines that are commonly installed on lawn and garden equipment. The spring applies tension on the valve allowing it to retract. Over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal a...Read morend is sold as an individual item. Check the diagrams for your model to ensure the proper repair procedure. A screwdriver will be needed to replace this hardware.