FH430V (BS22) Kawasaki Engine - Parts

This OEM Push Rod is a silver, metal part, approximately 5.5 inches long. It can be installed using a wrench or sockets. A Spark Plug Gap Tool may also be needed for maintenance. The installation of this partis rated as Medium difficulty by customers. It attaches inside the cylinder head, and is installed by tightening the rocker nut on...Read more top to manufacturer specs. This part opens and closes the intake and exhaust valves, and if broken there will be poor engine performance as well as an internal knocking or tapping sound from the engine. If damaged, likely due to fatigue or stress, it must be replaced. Refer to your owners manual or model number to ensure you are slecting the correct part.

This genuine oil seal is a brown, rubber part, measuring 8 x 14 x 5mm. This part can be installed using a screwdriver, wrench set, pliers, and pick, and a seal puller may also be required for maintenance. This repair is rated as "Easy" to install by customers. It attaches to the governer shaft to provide a tight seal, and if broken due ...Read moreto general wear or drying out, there will be visible oil coming out around the shaft. If damaged or missing, it should be replaced. Check your owners manual for the correct part number.

This Gasket-Rocker Case is a grey, individually sold part, direct from the original equipment manufacturer. It requires only a socket to install and is rated as Easy to install by customers. This part is installed between the valve cover and cylinder head, by torquing in an alternating pattern to the manufacturer specifications for a pr...Read moreoper seal. It provides a tight seal between the cylinder head and valve cover, and if broken due to general wear, you will see oil leaking around it. This part should be replaced if broken, or if removing the valve cover for other repairs as the gasket can only be used once. Only a visual inspection is needed to check for leaks. Refer to your owners manual or model number to ensure you are selecting the right part.

This O-ring, also known as a round seal, is an authentic OEM part used in lawn and garden equipment. It is a small, circular, rubber ring that helps create an airtight seal between the oil filter filler and engine to prevent leaking and ensure adequate lubrication. It is common for the O-ring to become brittle and lose its elasticity due ...Read moreto aging, and exposure to chemicals and high temperatures in the equipment. If an O-ring fails, it can result in oil leakage, leading to reduced equipment performance, and potential damage to the surrounding components. Carefully the oil ring off the sealing surface and clean the area thoroughly to ensure a proper seal for the new O-ring. Lightly lubricate the new O-ring and press it on to the sealing surface.

This is half of a collet. You will need to order two to receive a whole collet.

This Nut is a black, metal, individually sold part. Certified by the original equipment manufacturer, it can be installed with a wrench or socket and torque wrench by torquing to the manufacturer specficiations, and is rated as Easy to install by customers for multiple applications on different equipment. If damaged, the threads will be...Read more damaged or the edges will be rounded off, and it must be replaced. Refer to your owners manual to see if this part is right for you.

This part has been sourced from the original manufacturer and is intended to be used with four-stroke engines from Kawasaki. This gasket is used to provide spacing and to seal the connection between the carburetor and the intake manifold. The gasket may require a wrench and ratchet to install and is sold as an individual replacement part.

This is a original Kawasaki replacement part made for use with small engines. The purpose of this bolt is to secure fan housing. It is a hex head bolt and it is sold individually. Replacing this bolt you should use a properly sized socket wrench.

This is a genuine replacement flanged bolt which is supplied by the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your equipment, please make sure to check appropriate diagrams of your m...Read moreodel for the correct location and use of this item. Keep in mind this high-quality bolt is made of durable metal and is sold individually.

It is a genuine item that is supplied directly from original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. This replacement plug can be removed to drain the oil from the engine. It is made of durable gray plastic and it is sold individually.

A genuine item that is supplied directly from the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. It is a special screw for the armature, make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality hex socket screw is sold individually.

This is an genuine Kawasaki replacement part manufactured for use with four stroke engines. This metal guide plate is the used to direct the push rods. This guide plate is sold individually, most engines require two, please see model diagram for additional parts.