My Orders
FGFS56FSA Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replace igniter
1 person
found this instruction helpful.
-
Edward from NORWOOD, PA
- Really Easy
- 15 - 30 mins
New part needed to be spliced to old connector with porcelain wire nuts then removed lower oven drawer to access the connection for igniter
Was this helpful?
Thank you for voting!
Replacement of bottom oven panel
1 person
found this instruction helpful.
-
Eileen from AKRON, OH
- Very Easy
- Less than 15 mins
-
Screw drivers
Very simple. I removed the oven racks, loosened the two screws that held the old panel in place, lifted out the old panel and replaced it with the new one, then tightened the screws to hold the new panel in place. It took no more than 10 minutes.
Was this helpful?
Thank you for voting!
Panel finish ruined by tin foil
1 person
found this instruction helpful.
-
Barry from MOORE, OK
- Easy
- Less than 15 mins
-
Screw drivers
Removed both oven racks the removed two screws in back. Lifted rear of panel until front lip of panel was free. Installed new panel in reverse order. I was recycled the old steel panel at our local recycling station.
Was this helpful?
Thank you for voting!
. F3 error code
1 person
found this instruction helpful.
-
Garry from New Haven, CT
- Really Easy
- 30 - 60 mins
-
Nutdriver
I was getting an error code every time I turned my oven on. After a Google search I discovered it was a faulty oven temperature sensor. This website is awesome because it has a video showing how to install
Was this helpful?
Thank you for voting!
replaced theoriginal power cord.
1 person
found this instruction helpful.
-
Blanca from Union City, NJ
- Really Easy
- 30 - 60 mins
-
Screw drivers
moved the stove forward and removed old cord by uncruing two small screw and on ploged the all and replaced with the new one.
Was this helpful?
Thank you for voting!
Broken oven door cap.
1 person
found this instruction helpful.
-
James from LAKEWOOD, OH
- Really Easy
- 15 - 30 mins
-
Screw drivers
Watched a video - piece of cake!
Was this helpful?
Thank you for voting!
Outer glass was broken
3 of 8 people
found this instruction helpful.
-
Kristie from Alexander City, AL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed 2 screws in door handle. Removed cover and slid glass into place return cover and reattached handle with screw.
Was this helpful?
Thank you for voting!
Oven bottom panel
1 of 2 people
found this instruction helpful.
-
Maria from NEW ORLEANS, LA
- Very Easy
- Less than 15 mins
-
Screw drivers
Unscrewed old panel/removed and inserting new panel and used same 2 screws to secure in place.
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people
found this instruction helpful.
-
Denise from Landover, MD
- Really Easy
- Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
Lens cover for oven light broke.
0 of 1 people
found this instruction helpful.
-
Amy from Corona, CA
- Really Easy
- Less than 15 mins
Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.
Was this helpful?
Thank you for voting!
burned
0 of 1 people
found this instruction helpful.
-
Peter from East Northport, NY
- Easy
- Less than 15 mins
-
Socket set
Unplugged the appliance. backed out the screws and removed the control panel and panel mounting brackets. reinstalled
Was this helpful?
Thank you for voting!
temp was not reading right
3 of 10 people
found this instruction helpful.
-
santa from glassboro, NJ
- Really Easy
- Less than 15 mins
-
Nutdriver
remove back panel took out old part splice wire replaced
Was this helpful?
Thank you for voting!
Two of theTop gas burners would not spark
0 of 2 people
found this instruction helpful.
-
Robert R from Lewistown, PA
- Easy
- Less than 15 mins
Took 6 screws out holding the top on from the sides. Lifted the top front, popped out the spark module, Took 6wires off & reversed the processed to install the new one. I was really amazed when I ordered it Wednesday and it arrived on Friday. Believe me I bookmarked this site.
Was this helpful?
Thank you for voting!
Cracked inside glass
0 of 2 people
found this instruction helpful.
-
patti from Greer, SC
- A Bit Difficult
- 1- 2 hours
-
Screw drivers
I actually watched Youtube while I was changing it. This video was not actually the same make up of my oven, even though the I typed in the model number. I manage to figure it any with the steps anyway. It was harder then I expected but not horrible. I think I did pretty well for a women. Patti
Was this helpful?
Thank you for voting!
Broken globe in oven and burnt out light bulb
0 of 5 people
found this instruction helpful.
-
Sharon from Foley, AL
- Really Easy
- Less than 15 mins
Easy as 1-2-3
Other Parts Used:
Was this helpful?
Thank you for voting!