FGFS36FWD Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door glass cracked
-
Mike from Collegeville, PA
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Socket set
Really straightforward - just took door off of the hinges and worked taking it apart until I got to the front glass that was cracked. Took it out and put the new piece in and reversed the process. Really easy and I got to clean each piece on the way back in to get rid of some spills.
Was this helpful?
Thank you for voting!
Oven Wouldn't Turn On (F-10) Displayed
-
DAVID from PALMDALE, CA
- Easy
- Less than 15 mins
-
Screw drivers, Socket set
I thought it was the temperature sensor. I was wrong it was the e. O. C. It wasn't that hard to change,just alot of small screws. Once I plugged it in I tryed to turn on the oven it turned on right away. Only thing is I wish the part was cheaper & also there should have been a white cover on it. Not peel off the old one and re-use i
... Read more
t???? The oven is only 2yr's old, but never the less it got fixed. . . Works fine now.
Read less
Was this helpful?
Thank you for voting!
I had the top trim broken on the oven door.
-
Fanny from Alhambra, CA
- Easy
- Less than 15 mins
-
Screw drivers
Very simple repair. I received my part a few days after placing order; then installed it myself. Anyone can do this simple easy repair.
Was this helpful?
Thank you for voting!
broken door trim
-
Carol from Corpus Christi, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
simple to unscrew the door handle from the inside, remove the broken trim, place new trim on, clamp the door together, then screw the handle back on. Went well!
Was this helpful?
Thank you for voting!
I needed an extra oven rack to bake more at one time.
-
Sally from Cincinnati, OH
- Really Easy
- Less than 15 mins
I just installed the extra rack and re-arranged the existing ones. Works great!
Was this helpful?
Thank you for voting!
Temp did not match readout.
-
John from Columbiana, OH
- Really Easy
- Less than 15 mins
-
Nutdriver
Replaced temp probe and checked OK. This model did not have a full back as the instructional video showed. No cover to remove at all. Only suggestion might be to include two wire nuts of proper size. Average wire nut would be too big. Fortunately, I happened to have a couple.
Was this helpful?
Thank you for voting!
Needed to install an anti-tip bracket on my stove.
-
Daniel from Provo, UT
- Really Easy
- Less than 15 mins
-
Socket set
Moved the stove. Used the template to position the bracket. Put the supplied screws to attach bracket to the floor. Slid stove back into place. DONE!
Was this helpful?
Thank you for voting!
Old rusty worn out oven racks
-
June from Mt. Vernon, AL
- Really Easy
- Less than 15 mins
Removed the old oven racks and put in the new ones.
Was this helpful?
Thank you for voting!
Sliced Outlet Cord
-
William from Saint Clair Shores, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
I was replacing a range oven hood, so I pulled the oven away from the wall but left it plugged in. I removed the old oven hood, which had an exhaust pipe that was still mounted through the cupboard. While I was preparing the new oven hood the exhaust pipe fell out of the cupboard and cut the oven wire in half. I was able to find the part
... Read more
number on the existing cord and looked up on line. I ordered the part using 3-5 business days and it showed up in 2 days. I was able to attach the new cord, which had an easy clip plug, and secure back to the stove. Very easy and very inexpensive to do.
Read less
Was this helpful?
Thank you for voting!
Broken control panel housing
-
Marc from Gastonia, NC
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
I actually had to buy two parts, the cover and the control panel. But unfortunately I could not get them from the same place. But I replaced the control panel and the cover in about 15 minutes. No issues. Everytihg lokks brand new and works like a new stove. So I am very pleased.
Was this helpful?
Thank you for voting!
old oven racks were nasty!
-
Richard from Fort Wayne, IN
- Really Easy
- Less than 15 mins
We recently purchased condo and WhiteWestinghouse range needed some love. the old racks were not in very good shape so we ordered new.
Was this helpful?
Thank you for voting!
Just had to replace the racks in the stove.
-
charles from El Paso, TX
- Really Easy
- Less than 15 mins
Did just want to comment on the customer service. It was great. The easiest to order that I have ever dealt with. Received prompt attention to the order and processing the same. JUST GREAT> Thanks
Was this helpful?
Thank you for voting!
Gasket In Door Replaced
-
James from Greenville, TX
- Really Easy
- Less than 15 mins
The gasket just snapped in place. The first one I ordered was, my fault, the wrong one and I returned it and got the correct one two days later.
Was this helpful?
Thank you for voting!
55 yr old wall oven had burnt out seal
-
Diane from Natrona Heights, PA
- Really Easy
- Less than 15 mins
Very easy--just had to drill new holes for the clips because the are already pre set in the rubber gasket
Was this helpful?
Thank you for voting!
really bad ugly streaks inside of glass
-
John from Hemet, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
open door,throw the door latches at the hinges and remove door. Take the out of the outer panel so you can separate the glasses. remove clip that hold the outer glass in place. I ordered a replacement glass as I never thought that it would come clean it looked so bad, but it cleaned up like new so I now have a spare glass for my oven door
... Read more
. Just reverse the way you take it apart to put it back together.
Read less
Was this helpful?
Thank you for voting!