FGFB79GSB Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Outer glass was broken
3 of 8 people
found this instruction helpful.
-
Kristie from Alexander City, AL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed 2 screws in door handle. Removed cover and slid glass into place return cover and reattached handle with screw.
Was this helpful?
Thank you for voting!
temp. probe
1 of 2 people
found this instruction helpful.
-
Deane from WINCHESTER, KY
- Really Easy
- 30 - 60 mins
-
Nutdriver
Easy watched on line video
Was this helpful?
Thank you for voting!
I had a F31 code which means oven isn't working
1 of 3 people
found this instruction helpful.
-
Terry from CHELSEA, OK
- Really Easy
- Less than 15 mins
-
Nutdriver
Called fridgidaire and they told me the a F31 code means my temperature sensor is not working.
So I ordered one online. I installed it and I still have F31 code and still won't work. So what now? Do I trust them to tell me another part?
So I ordered one online. I installed it and I still have F31 code and still won't work. So what now? Do I trust them to tell me another part?
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people
found this instruction helpful.
-
Denise from Landover, MD
- Really Easy
- Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
Lens cover for oven light broke.
0 of 1 people
found this instruction helpful.
-
Amy from Corona, CA
- Really Easy
- Less than 15 mins
Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.
Was this helpful?
Thank you for voting!
Two of theTop gas burners would not spark
0 of 2 people
found this instruction helpful.
-
Robert R from Lewistown, PA
- Easy
- Less than 15 mins
Took 6 screws out holding the top on from the sides. Lifted the top front, popped out the spark module, Took 6wires off & reversed the processed to install the new one. I was really amazed when I ordered it Wednesday and it arrived on Friday. Believe me I bookmarked this site.
Was this helpful?
Thank you for voting!
Cracked inside glass
0 of 2 people
found this instruction helpful.
-
patti from Greer, SC
- A Bit Difficult
- 1- 2 hours
-
Screw drivers
I actually watched Youtube while I was changing it. This video was not actually the same make up of my oven, even though the I typed in the model number. I manage to figure it any with the steps anyway. It was harder then I expected but not horrible. I think I did pretty well for a women. Patti
Was this helpful?
Thank you for voting!
Broken globe in oven and burnt out light bulb
0 of 5 people
found this instruction helpful.
-
Sharon from Foley, AL
- Really Easy
- Less than 15 mins
Easy as 1-2-3
Other Parts Used:
Was this helpful?
Thank you for voting!
Sliced Outlet Cord
-
William from Saint Clair Shores, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
I was replacing a range oven hood, so I pulled the oven away from the wall but left it plugged in. I removed the old oven hood, which had an exhaust pipe that was still mounted through the cupboard. While I was preparing the new oven hood the exhaust pipe fell out of the cupboard and cut the oven wire in half. I was able to find the part
... Read more
number on the existing cord and looked up on line. I ordered the part using 3-5 business days and it showed up in 2 days. I was able to attach the new cord, which had an easy clip plug, and secure back to the stove. Very easy and very inexpensive to do.
Read less
Was this helpful?
Thank you for voting!
Aluminium foil fused to the panel
-
James from Durham, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the two back screws, slid out the old panel, then fitted in the new panel (it fit perfectly) and replaced the screws. Five minutes, tops.
Was this helpful?
Thank you for voting!
oven would not stay on
-
Mark from AuGres, MI
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
remove belly pan ,pull draw out easy acsess remove screws and replace
Was this helpful?
Thank you for voting!
inner glass uncleanable
-
Krista from Newtown, CT
- Easy
- 15 - 30 mins
-
Screw drivers
Took door apart, went online to partselect, ordered new glass, and put it back together. Oven looks like new. Makes sense to order the isolation as well when you do the repair
Was this helpful?
Thank you for voting!
clock went out on oven
-
Pamela from Lake Elsinore, CA
- Really Easy
- 15 - 30 mins
It was as easy as removing some screws from the back of the oven and replacing the part. I was worried about not ordering the overlay, since it was mentioned in all the descriptions, but soon found it is exactally what i thought it was, the face of the clock and the buttons that you see on the oven. The one I had was still in good condit
... Read more
ion and i opted to not replace. I just unpealed the old overlay from the old part, stuck it to the new part and it was good. Make sure you unplug the oven before you start to do anything as these electrical components can easily shock and cause harm!
Read less
Was this helpful?
Thank you for voting!
oven took too long to heat up
-
JAONNE from GAFILED, NJ
- Really Easy
- 15 - 30 mins
-
Nutdriver
un bolted the 6 nut driver heads found probe wire un pluged it 1/4 turn from lock it was in and pull out replace slide in new probe 1/4 turn to lock it in place replace nut driver self tappers and test simple!!
Was this helpful?
Thank you for voting!
really bad ugly streaks inside of glass
-
John from Hemet, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
open door,throw the door latches at the hinges and remove door. Take the out of the outer panel so you can separate the glasses. remove clip that hold the outer glass in place. I ordered a replacement glass as I never thought that it would come clean it looked so bad, but it cleaned up like new so I now have a spare glass for my oven door
... Read more
. Just reverse the way you take it apart to put it back together.
Read less
Was this helpful?
Thank you for voting!