FGF366CCA Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lost the metal part inside snob and it was loose.
5 of 7 people
found this instruction helpful.
-
Katherine from Reading, PA
- Really Easy
- Less than 15 mins
Simple. Removed the old ones and pushed the new knobs on. Took about 2 seconds.
Was this helpful?
Thank you for voting!
gas oven won't light
5 of 7 people
found this instruction helpful.
-
James from GRASS VALLEY, CA
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
get liquid wrench, remove oven door(2 screws) remove oven bottom(2 screws) follow directions included with part. unplug or shut off electricity at breaker panel, Have a good light source.
Was this helpful?
Thank you for voting!
While removing burned out light bulb, the glass cover fell to the floor of the oven and broke!!
5 of 7 people
found this instruction helpful.
-
Phyllis from GAINESVILLE, GA
- Easy
- Less than 15 mins
Husband very ill in bed. It's up to me!! Got a new bulb at HomeDepot and figured out how to get that wire 'thing' back in and the new glass cover installed. I DID IT!! WOW! My husband has always done these jobs around the house.......but now it's up to me.......and I'm not so dumb after all! I DID IT!! Now everyone who comes in
... Read more
the house.....I show them what I DID!! :-)
Read less
Was this helpful?
Thank you for voting!
replacing oven racks
4 of 5 people
found this instruction helpful.
-
Lawrence from Elmira, NY
- Really Easy
- Less than 15 mins
The replacement racks were spot on and the service was outstanding. had the racks in 2 days. Happy Happy Joy Joy! :)
Was this helpful?
Thank you for voting!
Broken door glide
4 of 5 people
found this instruction helpful.
-
Michael from Signal Hill, CA
- Really Easy
- Less than 15 mins
snapped the new piece of plastic in its place and ta da, its fixed.
Other Parts Used:
Was this helpful?
Thank you for voting!
Old racks had melted plastic on them.
4 of 5 people
found this instruction helpful.
-
James from PAINESVILLE, OH
- Very Easy
- Less than 15 mins
It was a replace racks not repair. No problem
Was this helpful?
Thank you for voting!
Repaired Oven Range Light Bulb
3 of 3 people
found this instruction helpful.
-
Alan from SAN MATEO, CA
- Very Easy
- Less than 15 mins
-
Screw drivers
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Was this helpful?
Thank you for voting!
Drawer Glide Was Broken
3 of 3 people
found this instruction helpful.
-
Karen from Yuma, AZ
- Very Easy
- Less than 15 mins
Took the drawer out, snapped the new glide in place, and replaced the drawer. Installation was simple with no tools required.
Was this helpful?
Thank you for voting!
Oven wouldn't heat
3 of 3 people
found this instruction helpful.
-
Chris from Elkins, WV
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Removing the drip pan and the bottom burner cover exposed the igniter, removing two screws retaining the bracket freed the old igniter. Removing the warming drawer allowed access to the control module to unplug the wiring on the ignitor. After making myself a diagram, I unplugged the wires and removed the malfunctioning igniter. Cutting
... Read more
the leads off the old igniter long enough to splice it on below the oven bottom with the enclosed wire nuts and attaching the new igniter (reusing the old insulation to protect the wire) took only minutes and reassembly was straightforward.
New igniter: $60
Repairman fee saved $150
Being able to tell my wife "See,
I told you I could fix it!" PRICELESS
New igniter: $60
Repairman fee saved $150
Being able to tell my wife "See,
I told you I could fix it!" PRICELESS
Read less
Was this helpful?
Thank you for voting!
Never received parts from PartSelect!!!
3 of 3 people
found this instruction helpful.
-
Ralph from SULLIGENT, AL
- Really Easy
- 30 - 60 mins
It went easy, I ordered the part from another vendor, received it in 3 days and it only took about 20 minutes to install.
I do not recommend ordering from PartSelect!
I do not recommend ordering from PartSelect!
Was this helpful?
Thank you for voting!
Oven will not light up or will take multiple try
3 of 3 people
found this instruction helpful.
-
charles from elmhurst, NY
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Screw drivers
Disconnected the oven from the wall outlet. Removed the bottom panel of the oven to reach the parts. Reached in the thight spot (not for a big guy)to unscrew the old igniter. Installed the new one. Plug the oven back. Turn the oven on bake at 350. Oveb lighted up in 5 seconds ! Working great since then!!!
Was this helpful?
Thank you for voting!
oven very slow on heating up up to five minutes to ignite.
4 of 6 people
found this instruction helpful.
-
manny from oakland, NJ
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set
First removed oven racks then two screws to remove oven door, removed two screw of oven fan cover, ( need to remove fan cover to have clearance to removed bottom cover of oven) removed bottom cover of oven, then removed two screws holding oven igniter and cut wires of old igniter then spliced wire of new igniter to existing wire
... Read more
and reassemble in reverse order.
Read less
Was this helpful?
Thank you for voting!
Change on e of the inside glass
4 of 7 people
found this instruction helpful.
-
Ronald from Ozone Park, NY
- Easy
- 1- 2 hours
-
Screw drivers
removed the screws holding the front part of the door and from there worked my way, untill the third glass.
It took a couple hours, my first time,. Overall easy,
It took a couple hours, my first time,. Overall easy,
Was this helpful?
Thank you for voting!
Oven Igniter failed
3 of 4 people
found this instruction helpful.
-
MICHAEL from LIVONIA, MI
- Easy
- 1- 2 hours
-
Nutdriver, Screw drivers
See other posts.... they have the correct repair procedures.
HIGHLY RECOMMEND removing the bottom drawer to access the space where splice will be made between new igniter wires and existing wires. This step is recommended in previous posts. I wasted a lot of time taking out unnecessary stuff in the oven compartment before I ... Read more realized that the drawer compartment provided easy access for repair. Story of my life on just about all repairs.
HIGHLY RECOMMEND removing the bottom drawer to access the space where splice will be made between new igniter wires and existing wires. This step is recommended in previous posts. I wasted a lot of time taking out unnecessary stuff in the oven compartment before I ... Read more realized that the drawer compartment provided easy access for repair. Story of my life on just about all repairs.
Read less
Was this helpful?
Thank you for voting!
Erratic burner ignition, re-light.
3 of 4 people
found this instruction helpful.
-
Bill from San Jose, CA
- A Bit Difficult
- More than 2 hours
-
Screw drivers
Remove bottom plates and deflector from oven, remove old igniter. Remove bottom drawer and panel to expose wiring. Cut wires, used supplied wire nuts to splice. The time consuming part of this job was having to clean all the parts before reassembly, and having to extract screws that were rusted into place due to heat and spillage. One
... Read more
of the igniter screws was stripped, and was very difficult to remove. The first part in your "probably cause" list was the right one! Thanks for the good service, and a useful website!
Read less
Was this helpful?
Thank you for voting!