EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FGF348KCE Frigidaire Range - Instructions

All Instructions for the FGF348KCE
91 - 105 of 121

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The housing around the clock/timer shattered
  • Sara from Tomball, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
We turned off the gas, moved the stove out from the wall and unplugged it. Then we removed the metal back (using an adjustable wrench because we didn't have a square headed screwdriver.) We then removed the four screws that had held the clock/timer in place before the plastic shattered. We inserted the new part and reinserted the screw s. Then we replaced the back cover. When we plugged the range back in and set the clock everything worked beautifully.
Was this helpful?
Thank you for voting!
The oven control board did not respond and was kicking out the GFI
  • MELVIN from ST LOUIS, MO
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I replaced the oven control board. I used the old overlay because I could not find a model # but I was able to locate the exact replacement part. it took some to find, but it paided off.Thanks for your help. I Got the replacement part # from the old control board.
Was this helpful?
Thank you for voting!
The Oven ignitor did not turn spark for the oven to turn on and heat up.
  • Ricardo from Brooklyn, NY
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I pulled the top cover from inside the oven off and unscrewed 2 screws to remove the heat plate. After i unplugged the adapter for the old ignitor apart and unplugged 2 wires and removed 2 screws that hole the ignitor to the plate. i replaced with the new ignitor, screwed back in place , plugged the 2 wires and the adaptor plug in and i was done , in less that 30 mins.. I also saved $180 (Sears $260) on this do it yourself repair.. Thanks PartSelect for having the part in stock.... R Diaz (Bklyn N.Y.)
Was this helpful?
Thank you for voting!
Oven Wouldn't Turn On (F-10) Displayed
  • DAVID from PALMDALE, CA
  • Easy
  • Less than 15 mins
  • Screw drivers, Socket set
I thought it was the temperature sensor. I was wrong it was the e. O. C. It wasn't that hard to change,just alot of small screws. Once I plugged it in I tryed to turn on the oven it turned on right away. Only thing is I wish the part was cheaper & also there should have been a white cover on it. Not peel off the old one and re-use i t???? The oven is only 2yr's old, but never the less it got fixed. . . Works fine now.
Was this helpful?
Thank you for voting!
I needed an extra oven rack to bake more at one time.
  • Sally from Cincinnati, OH
  • Really Easy
  • Less than 15 mins
I just installed the extra rack and re-arranged the existing ones. Works great!
Was this helpful?
Thank you for voting!
broken door trim
  • Carol from Corpus Christi, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
simple to unscrew the door handle from the inside, remove the broken trim, place new trim on, clamp the door together, then screw the handle back on. Went well!
Was this helpful?
Thank you for voting!
Broken control panel housing
  • Marc from Gastonia, NC
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
I actually had to buy two parts, the cover and the control panel. But unfortunately I could not get them from the same place. But I replaced the control panel and the cover in about 15 minutes. No issues. Everytihg lokks brand new and works like a new stove. So I am very pleased.
Was this helpful?
Thank you for voting!
old oven racks were nasty!
  • Richard from Fort Wayne, IN
  • Really Easy
  • Less than 15 mins
We recently purchased condo and WhiteWestinghouse range needed some love. the old racks were not in very good shape so we ordered new.
Was this helpful?
Thank you for voting!
Temp did not match readout.
  • John from Columbiana, OH
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Replaced temp probe and checked OK. This model did not have a full back as the instructional video showed. No cover to remove at all. Only suggestion might be to include two wire nuts of proper size. Average wire nut would be too big. Fortunately, I happened to have a couple.
Was this helpful?
Thank you for voting!
Needed to install an anti-tip bracket on my stove.
  • Daniel from Provo, UT
  • Really Easy
  • Less than 15 mins
  • Socket set
Moved the stove. Used the template to position the bracket. Put the supplied screws to attach bracket to the floor. Slid stove back into place. DONE!
Was this helpful?
Thank you for voting!
Old rusty worn out oven racks
  • June from Mt. Vernon, AL
  • Really Easy
  • Less than 15 mins
Removed the old oven racks and put in the new ones.
Was this helpful?
Thank you for voting!
I had the top trim broken on the oven door.
  • Fanny from Alhambra, CA
  • Easy
  • Less than 15 mins
  • Screw drivers
Very simple repair. I received my part a few days after placing order; then installed it myself. Anyone can do this simple easy repair.
Was this helpful?
Thank you for voting!
Just had to replace the racks in the stove.
  • charles from El Paso, TX
  • Really Easy
  • Less than 15 mins
Did just want to comment on the customer service. It was great. The easiest to order that I have ever dealt with. Received prompt attention to the order and processing the same. JUST GREAT> Thanks
Was this helpful?
Thank you for voting!
Sliced Outlet Cord
  • William from Saint Clair Shores, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I was replacing a range oven hood, so I pulled the oven away from the wall but left it plugged in. I removed the old oven hood, which had an exhaust pipe that was still mounted through the cupboard. While I was preparing the new oven hood the exhaust pipe fell out of the cupboard and cut the oven wire in half. I was able to find the part number on the existing cord and looked up on line. I ordered the part using 3-5 business days and it showed up in 2 days. I was able to attach the new cord, which had an easy clip plug, and secure back to the stove. Very easy and very inexpensive to do.
Was this helpful?
Thank you for voting!
55 yr old wall oven had burnt out seal
  • Diane from Natrona Heights, PA
  • Really Easy
  • Less than 15 mins
Very easy--just had to drill new holes for the clips because the are already pre set in the rubber gasket
Was this helpful?
Thank you for voting!
All Instructions for the FGF348KCE
91 - 105 of 121