EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FGF345GSB Frigidaire Range - Instructions

All Instructions for the FGF345GSB
61 - 75 of 124

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replaced theoriginal power cord.
1 person found this instruction helpful.
  • Blanca from Union City, NJ
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
moved the stove forward and removed old cord by uncruing two small screw and on ploged the all and replaced with the new one.
Was this helpful?
Thank you for voting!
Old screws were damaged
1 person found this instruction helpful.
  • Miriam from BROOKLYN, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Took out old screws and replaced with new
Was this helpful?
Thank you for voting!
No problem
1 person found this instruction helpful.
  • Pamela from DETROIT, MI
  • Very Easy
  • Less than 15 mins
  • Screw drivers
My daughter did the installation and it was quick. She had no problem, and it's working great. She love it. She just use a philp screwdriver to take off the bolt then unplug the control adaptor. From the back then plug the new one in and that's it. Easy as 123
Was this helpful?
Thank you for voting!
cracked range oven door handle
1 person found this instruction helpful.
  • michael from morton, PA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
removed 2 screws from inside oven door swap out old to new handle reinstall 2 screws done less than 15 min.
Was this helpful?
Thank you for voting!
Code f10
1 person found this instruction helpful.
  • bennie from san francisco, CA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Easy installation using a nut driver and a Phillip screwdriver.plug in harness connector and done.
Was this helpful?
Thank you for voting!
Needed an additional rack
1 person found this instruction helpful.
  • Gary from Darragh, PA
  • Really Easy
  • Less than 15 mins
Open the door and slide in the new rack.
Was this helpful?
Thank you for voting!
Igniter did not light.
1 of 2 people found this instruction helpful.
  • marcus from hot springs, AR
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
The electric was the next step it worked.
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people found this instruction helpful.
  • Denise from Landover, MD
  • Really Easy
  • Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
Oven would not get up or stay up to selected temperature
0 of 1 people found this instruction helpful.
  • wondell from Winnemucca, NV
  • Easy
  • Less than 15 mins
  • Nutdriver
Pull stove out to get behind it,unplug temperature probe plug. Remove temp probe from oven by removing the screw holding it in place on back of oven. Cut plug off temp probe unit leaving as much lead wire as possible on plug end. Strip wires on new probe and end of plug wires(one quarter inch). Then I used two small butt connectors to joi n the stripped wires,one for each pair of wires. Two small wire 'nuts' may also be used as the connections are outside the oven and not exposed to the heat of the oven while it is in operation. Hope this helps the inexperienced 'do it yourselfers'--:)
Was this helpful?
Thank you for voting!
Cracked inside glass
0 of 2 people found this instruction helpful.
  • patti from Greer, SC
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
I actually watched Youtube while I was changing it. This video was not actually the same make up of my oven, even though the I typed in the model number. I manage to figure it any with the steps anyway. It was harder then I expected but not horrible. I think I did pretty well for a women. Patti
Was this helpful?
Thank you for voting!
Cracked inner oven door
  • Steve from Hollypond, AL
  • Easy
  • More than 2 hours
  • Pliers, Screw drivers
Removed outer glass first ,then worked my way thru to inner glass..
Was this helpful?
Thank you for voting!
Broken oven door glass
  • Joseph from Cranberry township, PA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
I followed directions for replacement of the glass from the web. Replacement was simple and easy.
Was this helpful?
Thank you for voting!
Clock/Oven program didn't work.
  • Julie from Doyle, CA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Very easy, just pulled the oven out and unscrewd the back, took the old program out plugged the new one in and it works just fine.
Was this helpful?
Thank you for voting!
broken inner glass
  • Neal from Warsaw, IN
  • Easy
  • 30 - 60 mins
  • Screw drivers
Removed oven door. Removed screws from bottom of door as well as handle screws. Remove inner panel to expose glass. Replaced glass panel and reverse steps. Very easy.
Was this helpful?
Thank you for voting!
inner oven door glass broken
  • Cheryl from Derby, NY
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I was unable to loosen the screws myself so I called my friends husband to help me. We watched the video together and followed the instructions. The door in the video was a bit different than mine but this repair was easy.
Was this helpful?
Thank you for voting!
All Instructions for the FGF345GSB
61 - 75 of 124