FGF337GCB Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven wouldn't light consistently
2 of 3 people
found this instruction helpful.
-
BRADLEY from SHERIDAN, MI
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
remove oven floor and racks remove two self tapping screws unplug igniter replace be careful not to touch element plug in reverse order to reassemble
Was this helpful?
Thank you for voting!
Igniter gets hot but wouldn't ignite
2 of 3 people
found this instruction helpful.
-
Vajai from RICHMOND HILL, NY
- Very Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I did the repair with the instructions from parts select
It was very self explationatry
Thank you parts select
I saved at least $400.
It was very self explationatry
Thank you parts select
I saved at least $400.
Was this helpful?
Thank you for voting!
The range clock wasn't keeping time, and the oven would shut off randomly in the middle of baking.
1 person
found this instruction helpful.
-
Andrew from San Juan Capistrano, CA
- Easy
- 15 - 30 mins
-
Screw drivers
Removed the metal cover on the back of the range by unscrewing the square-drive screws around the perimeter, left the center screw until the end to make it easier to hold for removal.
The control unit was held in with 4 Philips head screws, and connected by a single wire-to-board connector. Unplugged the connector and removed t ... Read more he screws and the control unit came right out.
The replacement unit doesn't come with a face plate, so I used a razor blade to carefully remove it from my old unit. The adhesive that held it on was still sticky so I was able to easily attach it to the new unit.
Then I just put everything back together in reverse order. One of the easiest appliance prepares I've done.
The control unit was held in with 4 Philips head screws, and connected by a single wire-to-board connector. Unplugged the connector and removed t ... Read more he screws and the control unit came right out.
The replacement unit doesn't come with a face plate, so I used a razor blade to carefully remove it from my old unit. The adhesive that held it on was still sticky so I was able to easily attach it to the new unit.
Then I just put everything back together in reverse order. One of the easiest appliance prepares I've done.
Read less
Was this helpful?
Thank you for voting!
replaced theoriginal power cord.
1 person
found this instruction helpful.
-
Blanca from Union City, NJ
- Really Easy
- 30 - 60 mins
-
Screw drivers
moved the stove forward and removed old cord by uncruing two small screw and on ploged the all and replaced with the new one.
Was this helpful?
Thank you for voting!
Old screws were damaged
1 person
found this instruction helpful.
-
Miriam from BROOKLYN, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
Took out old screws and replaced with new
Was this helpful?
Thank you for voting!
No problem
1 person
found this instruction helpful.
-
Pamela from DETROIT, MI
- Very Easy
- Less than 15 mins
-
Screw drivers
My daughter did the installation and it was quick. She had no problem, and it's working great. She love it. She just use a philp screwdriver to take off the bolt then unplug the control adaptor. From the back then plug the new one in and that's it. Easy as 123
Was this helpful?
Thank you for voting!
Broken burner knob
1 person
found this instruction helpful.
-
Dolores from SAN ANTONIO, TX
- Very Easy
- Less than 15 mins
Received new knob simply inserted and it worked perfectly!
Was this helpful?
Thank you for voting!
The know was missing
1 person
found this instruction helpful.
-
Claude from PORTLAND, OR
- Really Easy
- Less than 15 mins
So easy... just put the knob in place.....
Was this helpful?
Thank you for voting!
Needed an additional rack
1 person
found this instruction helpful.
-
Gary from Darragh, PA
- Really Easy
- Less than 15 mins
Open the door and slide in the new rack.
Was this helpful?
Thank you for voting!
Code f10
1 person
found this instruction helpful.
-
bennie from san francisco, CA
- Really Easy
- Less than 15 mins
-
Nutdriver
Easy installation using a nut driver and a Phillip screwdriver.plug in harness connector and done.
Was this helpful?
Thank you for voting!
Gas oven stopped working. I read that it probably was the igniter. Bought a new one to ins
1 person
found this instruction helpful.
-
Dennis from WEST ROXBURY, MA
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
YouTube video I used was for a newer version of the same model stove. Door did not have latches to remove it. It was fairly easy getting to the old igniter but a bit of a struggle getting to unplug it, as the connector was behind a small metal shield in the bottom left corner of the oven. Because I couldn’t remove the oven door, it made i
... Read more
t more difficult to undo the screw holding it in. I finally did, and from that point it went smoothly. I was worried that I was going to access it from the back, but I didn’t need to. I installed the new one, turned gas back on, moved the stove back to position, and turned on the oven. Very happy to have succeeded, adding a few more years to the stove and saving money for the installation of the igniter.
Read less
Was this helpful?
Thank you for voting!
Igniter did not light.
1 of 2 people
found this instruction helpful.
-
marcus from hot springs, AR
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
The electric was the next step it worked.
Was this helpful?
Thank you for voting!
Burner knob broke.
2 of 5 people
found this instruction helpful.
-
ERICA from PHILADELPHIA, PA
- Very Easy
- Less than 15 mins
It was easy to find on the website. It doesn't match exactly, however without the knob the burner will not light. It was literally a snap to snap the knob in place. The part arrive in a timely manner from the USPS. Thank you! I'm encouraged to get one more piece of equipment repaired because of this site thorough service.
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people
found this instruction helpful.
-
Denise from Landover, MD
- Really Easy
- Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
Oven would not get up or stay up to selected temperature
0 of 1 people
found this instruction helpful.
-
wondell from Winnemucca, NV
- Easy
- Less than 15 mins
-
Nutdriver
Pull stove out to get behind it,unplug temperature probe plug. Remove temp probe from oven by removing the screw holding it in place on back of oven. Cut plug off temp probe unit leaving as much lead wire as possible on plug end. Strip wires on new probe and end of plug wires(one quarter inch). Then I used two small butt connectors to joi
... Read more
n the stripped wires,one for each pair of wires. Two small wire 'nuts' may also be used as the connections are outside the oven and not exposed to the heat of the oven while it is in operation. Hope this helps the inexperienced 'do it yourselfers'--:)
Read less
Was this helpful?
Thank you for voting!