FGF303CWD Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven would come on when turned off
2 of 3 people
found this instruction helpful.
-
Joy from ANDERSON, IN
- Really Easy
- 15 - 30 mins
-
Screw drivers
It was so easy. I am 66 yrs old. It only took 30 minutes and a screwdiver. I was totally amazed and I thank you.
Was this helpful?
Thank you for voting!
weak oven igniter/not enough amp. to light oven
3 of 6 people
found this instruction helpful.
-
JEFFREY from ULSTER, PA
- Really Easy
- 15 - 30 mins
-
Nutdriver
first I removed oven draw for access, then removed the two screws with a nut driver, next removed the two wire nuts and the old element was free. Replaced new element in reverse steps of removing old and the new part ignited the stove within 30 seconds, but now I have no excuse for not fixing dinner!! Thanks for promt shipping, it arri
... Read more
ved early than anticipated.
Read less
Was this helpful?
Thank you for voting!
Lacking oven racks on used appliance
2 of 3 people
found this instruction helpful.
-
Katherine from Roanoke, VA
- Really Easy
- Less than 15 mins
Your website is great...easy and it literally took me no mote than 5 minutes to find what I needed and order...and received it VERY quickly. Must say I was dreading going to some parts house that we have in our town in bad area, and searching on dusty shelves for what I needed...am so glad I found you!!
Was this helpful?
Thank you for voting!
oven would not lite
1 person
found this instruction helpful.
-
david from canastota, NY
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
took of bottom pan and pan above the gas flame off and the igniter off , cut the two wires. replaced the igniter hooked the wires togther, replaced both pans. turned the oven on and it lite
Was this helpful?
Thank you for voting!
My Oven Was Taking Too Long To Heat Up,I Was Smelling Gas,Which Is The First And Last Warning
1 person
found this instruction helpful.
-
John from Manchester, CT
- Really Easy
- Less than 15 mins
-
Nutdriver
Simple repair ,unplug unit,cut the 2 wires close to heating element,remove elements 2 screws w/1/4 inch nut driver. Cut and strip 2 wires back about 1/2 inch,be sure to cut wires close to element,wirenut both wires together. Reinstalled element,plug unit back in. Done . . . 12 Minutes,ready to bake a cake. .
Was this helpful?
Thank you for voting!
The ignitor came on with a call for heat but the gas valve did not open
1 person
found this instruction helpful.
-
Terry from Tonganoxie, KS
- Really Easy
- Less than 15 mins
-
Nutdriver
First turn the thermostat off-cut the wires leading to the ignitor, close to the ignitor side-Remove the two 1/4" monting bracket screws and remove the ignitor install the new ignitor using the same 1/4" screws and reconnect the wires leading into the ignitor, note the polarity is not imp[ortant--use the heat temp-wire nuts provided--clo
... Read more
se the door and call for heat the gas valve is working fine now....
Read less
Was this helpful?
Thank you for voting!
Oven wouldn't heat
2 of 4 people
found this instruction helpful.
-
M. Nicole from La Mirada, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Then I reattached the new piece. It was the easiest thing ever and i'm a woman!
Was this helpful?
Thank you for voting!
oven wont start
1 person
found this instruction helpful.
-
ismael from perth amboy, NJ
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires....install new element and woalla.........save thangsguivingday thanks to part select .com..........
Was this helpful?
Thank you for voting!
Oven wouldn't light off
1 person
found this instruction helpful.
-
Mickey from Fallbrook, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
First I removed the two screws that held the element in place. I then pulled the element out about 3 inches and disconnected the two wires nuts, (from last repair) installed new igniter. Not rocket science here.
Was this helpful?
Thank you for voting!
Needed an additional rack
1 person
found this instruction helpful.
-
Gary from Darragh, PA
- Really Easy
- Less than 15 mins
Open the door and slide in the new rack.
Was this helpful?
Thank you for voting!
OVEN WOULD NOT COME ON
1 person
found this instruction helpful.
-
david from SLIDELL, LA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
CUT THE WIRES ON OLD IGNITER AND WIRE NUT THE WIRES OF THE NEW IGNITER TO WHERE I CUT THE OLD ONE OFF.
Was this helpful?
Thank you for voting!
Oven Would Not Light
1 person
found this instruction helpful.
-
Michael from Houston, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver
Removed broiler pan drawer,removed two screws on element unplugged wires,installed new one. ,Tried oven, works like it did when new. It couldn't have been easier,plus I saved a bunch of money thank you partselect mike m.
Was this helpful?
Thank you for voting!
oven took longer and longer to ignite ,then just stopped.
1 person
found this instruction helpful.
-
marc from troy, MI
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
took out the cove plate inside oven. romoved old igniter load.cutt and stripped new wire to new ignighter , using ceramic wire nuts supplied. reinstalled all and voila. it's as good as new. PS just for safety sake always unplug appliance from power.
Was this helpful?
Thank you for voting!
would not light oven
1 person
found this instruction helpful.
-
Richard from Huston, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Socket set
take off the old by unsceawing it scraw thenew one onput the wires down the back throw the hole put the wires to gather and cap tham plug the elect. back in and turn it on for to test it wow it worked he he ...richard
Was this helpful?
Thank you for voting!
igniter burned-out, not able to start oven
1 person
found this instruction helpful.
-
BETTY from PHILADELPHIA, PA
- A Bit Difficult
- 15 - 30 mins
-
Pliers, Screw drivers
followed directions enclosed.required removal of oven door and old igniter
Was this helpful?
Thank you for voting!