Enjoy fresher-tasting water and ice with this refrigerator water filter. Its carbon filter material helps reduce chlorine taste and odour as water passes through to the dispenser and ice maker. Over time, the filter becomes used up or clogged, which may affect taste or slow water flow. Replacing it regularly helps maintain filtration and ...Read moresteady dispensing. Follow the replacement schedule on the packaging, flush the new cartridge as directed before drinking the water, and reset the filter reminder after installation. This is an OEM part sourced directly from the manufacturer.
Lingering refrigerator odors are what this OEM air filter is meant to reduce. It fits in the refrigerators filter housing, so check that it is listed for your model before ordering. Replace it every six months and activate or reset the air-filter status indicator as your refrigerator manual directs.
When a refrigerator is not making ice, this complete 115 V twist-type ice maker assembly is an OEM replacement. Check compatibility with your refrigerator model before ordering. Disconnect the refrigerator from power before replacing the assembly.
This genuine crisper drawer assembly is designed for the right-hand side and includes built-in rollers for smooth operation. It stores fruits and vegetables at an ideal humidity level and replaces damaged or missing drawers in select refrigerator models. Installation is simple—just follow the guidance in your owner's manual and use gloves for safety.
This part connects the refrigerator auger motor to the ice bucket mechanism, transferring rotation that moves ice toward the dispenser chute. Mounted on the motor shaft behind the ice bin, the auger drive bar engages the bucket drive as the motor turns. Worn engagement surfaces, stripped threads, cracks, or corrosion may prevent ice from ...Read moremoving even when the motor runs. Replacing a damaged drive bar helps restore the mechanical connection needed to turn the auger and deliver stored ice through the door dispenser. This is an OEM part sourced directly from the manufacturer.
If your refrigerator is too warm or too cold, a temperature-sensing problem may be involved. The NTC thermistor senses refrigerator temperature and sends information to the electronic control. This OEM kit includes connectors. Unplug the refrigerator and wear work gloves before installation.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice maker was not working
52 of 80 peoplefound this instruction helpful.
Richard from N CALDWELL, NJ
Really Easy
Less than 15 mins
Nutdriver, Screw drivers
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension
... Read more to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
Read less
Was this helpful?
Thank you for voting!
Change filter
22 of 47 peoplefound this instruction helpful.
Claude from MARYVILLE, TN
Easy
Less than 15 mins
When removing existing filter you will experience some resistance at the 10-4 position which requires a little extra pressure to reach the 9-3 position.
Was this helpful?
Thank you for voting!
It just stopped making ice.
8 of 13 peoplefound this instruction helpful.
David from VISALIA, CA
A Bit Difficult
30 - 60 mins
Screw drivers
First: I could not watch any videos. Big downer. Read the reviews and read a post about “three screws”. Opened the freezer and emptied everything in it. Remove the bin. Two screws are on the left side. They go into the side wall. Here’s where things get weird. The plastic “box” holds the “ice making assembly”. That box
... Read more is attached by FOUR slots. You will need to remove the wire rack below the frame. There’s a plastic spacer on the left side with a slot on it. You can pull it of with your fingers when you rotate it. Slide the rack to the left and pull down the rack from the RIGHT side holes. You have move the box toward you about a inch, then it drops down. Now, there is a electrical connection from the box to the rear of the refrigerator wall. You need a small screwdriver to lift the tab on the TOP of the connector to release it. Once that is done, slide the box forward and put it in the sink. While all this is happening, the freezer is thawing out. Once you remove the box, you will get error codes on the digital display. This is a good thing. There are two “square head’” screws that you have to remove to separate the TWO parts that make the box. Slide the outer trim towards you. The icemaker assembly slides into four slots. You put the new wires in the same place as the one you removed. Put everything back together the opposite of the removal. Now for the secret. All that food you removed? Put it back in until you can slide the box into place. Then you plug the connector in. The box should be sitting on the food. THIS IS THE SECRET. The ice maker has two options. Cubed or Crushed. There are two components that make them happen. On the left side there is a slot with a gray lever the moves up an down. There is an piece of aluminum on the right side the drives the screw in the box. Rotate the screw drive to 45 degrees. THIS IS THE SECRET. On the left side of the box is a rod that is spring loaded and has a bent end. It’s about “timing”. Find a piece of “kite string”. I used the string from the yellow energy tag that came with the fridge. The box is sitting on the frozen food. The wire in the back is connected. Loop the string around the lever AND PULL UP. Slide the whole thing into place using the slots. When it’s in place, let go of the string. Put the two screws back in.
FINAL. You have to PRESS AND HOLD the IceMaker button to reset. You’ll get ice cubes in a couple of hours. Through the first 24 hrs away. You’re welcom.