FFUS2613LP Electrolux Refrigerator - Instructions

push in old filter, turned to the left and filter came out. Pushed in new filter and it clicked into place. Very easy to do.

Removed the previous water filter. Installed the new water filter.
I then filled a large glass full of water from the water dispenser several times to clear the air from the filter and lines.

Time to install, less than 8 minutes.

Thank you Parts Select!

great push old in came out and push new one in

Shut off water supply at the main, drained water from lines, pushed filter in from end of filter then pulled out. Removed the 2 plastic protecting tubes from the inlet and outlet stems. Made sure filter was facing same way as the old one, pushed filter in making sure it was locked, turned water supply on slowly, ran about a gallon of wate ... Read more r thru filter. If not done the taste is odd. 5 minute repair.

Removed the old filter and took off the water caps and pushed it in place. Then I used a pitcher to clear the air from the line and we are good to go for 6 more months

I just follow the instructions , it was really easy.

See above

pushed in on old one and popped right out. removed plastic caps from new one and slid it into place

wife did it in less than a minute

first, there many different water filters. your experience will be different according to your water filter type.

Just removed the older one with the new one.

pushed in on old filter to remove,pushed in new one to install,reset light on door

just had to follow the instructions that came with new filter. Took less than a minute.

it is a very simple process. pull out the water filter. put in the new one after removing the plastic tops. slide the filter in place pushing to set it in place. run water through water spout on door of fridge for about 3 minutes or until all the air bubbles are out. and there you are ready for a drink of water.

took out filter, replaced with other