EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FFU12M4AW2 Frigidaire Freezer - Instructions

All Instructions for the FFU12M4AW2
16 - 30 of 39

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fridge quit working.
1 person found this instruction helpful.
  • Bill from Bay City, MI
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Wrench set
A little research told me the hum plus no cooling was either the compressor or the relay. I ordered the new relay and put it in but it didn't fix the problem. I ended up having to buy a new fridge, but it was worth the $30 gamble to see if I could fix it on the cheap and it saved me the money a service call would've cost. Pretty easy i nstallation, just in a tight space on my model.
Was this helpful?
Thank you for voting!
No instructions included
1 person found this instruction helpful.
  • Beverly from Provo, UT
  • Easy
  • Less than 15 mins
Visual assessment and put in by hand.
Was this helpful?
Thank you for voting!
The end cap of the bottom shelf of my freezer was broken
1 person found this instruction helpful.
  • Kathleen from SELDEN, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Finally after a few years of putting the shelf back on and balancing food on it I looked up the part.
The clips came in a few days.
I used a screwdriver to pop off the old piece. I lined up the clip and pushed it in.!
I am sooo glad I purchased this.
Was this helpful?
Thank you for voting!
broken pieces
2 of 5 people found this instruction helpful.
  • D from Fairport, NY
  • Really Easy
  • Less than 15 mins
replaced them
Was this helpful?
Thank you for voting!
broken shelf end
0 of 1 people found this instruction helpful.
  • Roger from Enfield, NH
  • Really Easy
  • Less than 15 mins
snapped in the new shelf end and we were back in business. Thanks for the great & fast service RJL
Was this helpful?
Thank you for voting!
Broken door shelf end brackets
0 of 3 people found this instruction helpful.
  • RUDOLPH from PRINCETON, TX
  • Really Easy
  • Less than 15 mins
Push-in replacement - easy. I must note that I received my order within two days - remarkable service from Part Select!
Was this helpful?
Thank you for voting!
Broken door end cap.
0 of 5 people found this instruction helpful.
  • Duane from Merrill, MI
  • Really Easy
  • Less than 15 mins
I was so supprised that Part slect was around and had the part . You can count on me to tell others about your wonderful service . I will see to it that I use your service when somthing else goes wrong with any of my appliences
Thanks again !
Was this helpful?
Thank you for voting!
Plastic shelf supports broken
6 of 24 people found this instruction helpful.
  • shari from west sand lake, NY
  • Easy
  • 15 - 30 mins
  • Pliers
Needed to remove both left and right broken (plastic) supports and reinsert the new parts. Not hard at all...worked like a charm!
Was this helpful?
Thank you for voting!
door shelf useless
0 of 9 people found this instruction helpful.
  • Joel from Spring Green, WI
  • Easy
  • Less than 15 mins
Decide how to snap end cap into door.
Put one end on door.
Fasten bar, then with other end cap
in the bar, snap it into the door.
Was this helpful?
Thank you for voting!
compressor not running
  • wilson from indialantic, FL
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Wrench (Adjustable)
thanks to all of the people who had the same problems I was able to make a quick fix on my fridge. I pulled the back cover off and found the compressor not kicking on so I replaced the start cap. and im back in bussiness.
Was this helpful?
Thank you for voting!
not cold enough
  • Gary from Hudson, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
per the video..easy installation....unfortunately the temperature did not improve. We still have a refrigerator temp in the upper freezer.....and a "cooler" in the refrigerator section
Was this helpful?
Thank you for voting!
Frige and freezer not cooling
  • FRANK from BRADENTON, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I should have ordered start kit instead of start capacitor. The start cap astir did not fix problem so I ordered kit. Compasator comes as part of kit. Followed enclosed instructions. Cut existing wires and reconnected new wiring. Simple as that. It's a plug in item. Now worried it may be working to good. Freezer down to 10 deg. Watching to see if compressor is running to long. Seems ok lol. Wife hates me now. She wanted new frige.
Was this helpful?
Thank you for voting!
won't start repaced the run capacitor didn't solve the problem so I ordered a defrost timer
  • Curtis from Winlock, WA
  • Really Easy
  • 15 - 30 mins
I watched the videos (they really help) and followed the steps. Everything went smooth with no surprises
Was this helpful?
Thank you for voting!
awasome
  • chris from springfield, GA
  • Really Easy
  • Less than 15 mins
After reading reviews I was not sure but I ordered part on Wensday in the AM and I had the correct part Thursday evening this company rocks thank you by the way i paid for regular shipping I will order again in a heartbeat
Was this helpful?
Thank you for voting!
freezer would not freeze longer than one day. after ten years without problem
  • ronald from deering, NH
  • Really Easy
  • Less than 15 mins
pulled out freezer, went to floor,reached in next to compressor pulled off clip just like on the video.Pulled off old capacitator took off wire leads.Installed new one. Freezer runs great.Loaded it up with beef pork and venison. No problems.
Was this helpful?
Thank you for voting!
All Instructions for the FFU12M4AW2
16 - 30 of 39