My Orders
- Home
- FFU11FC2CW3
- Instructions
FFU11FC2CW3 Frigidaire Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fan would not start occasionally
-
Mike from Satellite Beach, FL
- Easy
- 15 - 30 mins
-
Screw drivers
I unscrewed the screws that held the old fan on, disconnected the wiring harness and removed the old fan. I pulled the blades off the motor and put it on the new fan. One thing of note, the screw holes on the new fan weren't threaded. I assume this is by design, so I used the screws to thread the holes before installing it in the freezer
... Read more
. Once I did this, the rest of the installation was easy, just screw it back in and connect the wiring harness.
Read less
Was this helpful?
Thank you for voting!
When I was ready to instal fan motor, I noticed that there was no thread where I was supposed to screw in the bolts
-
hector from los fresnos, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
When i found out there was no thread in brace where bolts were supposed to screw in, I panicked. I thought I would have to send part back or go to a machine shop to make a thread. I called a friend for help and he told me the bolts would make the thread if I just screwed them in. Sure enough, the bolts made the thread and then I just proc
... Read more
eeded to instal motor and put refrigerator back together. It was simple.
Read less
Was this helpful?
Thank you for voting!
Freezer freezes up; lower unit to warm
-
David from Front Royal, VA
- Easy
- 15 - 30 mins
-
Nutdriver
Replaced freezer defrost thermostat. Unit worked perfectly.
Was this helpful?
Thank you for voting!