EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FFU11FC2CW2 Frigidaire Freezer - Instructions

All Instructions for the FFU11FC2CW2
46 - 60 of 78

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer ran alot, then temperture began to vary.
  • John from Port Republic, VA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Watched video on Part Select which shows you how to replace the thermostat with several good pointers. Very easily done and now the freezer works great.
Was this helpful?
Thank you for voting!
Would not freeze or defrost
  • RONALD from Sevierville, TN
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Unplug freezer let stand all night to defrost. Remove the tray cover which is located on the upper back area inside the freezer.( 3 twist fittings remove it ). Remove the upper stainless steel panel which is secured with 6 screws. This will drop down exposing the condenser. Note all the wires and fan will stay attached to the stainless steel panel, this panel will drop down no need to unplug anything. On the left upper side next to the condenser you will see the thermostat. Two color coded wires. Remove the thermostat and install the new one at the same location.
Was this helpful?
Thank you for voting!
Freezer was no longer keeping items frozen,
  • Philippa from New York, NY
  • Easy
  • 30 - 60 mins
  • Screw drivers
I followed the You-Tube instructions, removed the ice from the compressor and replaced the thermostat with the part I received from Part Select. What I took out was a part that was very much inferior to the replacement part. The repair saved me a lot of money for a new freezer and it was not difficult to do following the video. Now the f reezer runs better and quieter than ever. Thank you Parts Select.
Was this helpful?
Thank you for voting!
would not defrost
  • Nick from Silver Spring, MD
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Replace thermostat and show and tell made it easy.
Was this helpful?
Thank you for voting!
Freezer was warm
  • Charles from Macomb, MI
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I first noticed my ice cream getting soft. Then 2 days later the alarm went. I emptied the freezer, opened the panels and saw no frost. I saw that 99% of issues were resolved with a defrost timer and thermostat so I ordered those. I have to say the parts came quickly and they went in very easy. My freezer seems to be in the 1% categor y though. It's still not cooling even though I can measure the temperature at the front of the evaporator coil is cold but by the end of the coil it's almost room temperature. I think a repairman is called for.
Was this helpful?
Thank you for voting!
Freezer would constantly run. Even when it was super cold inside.
  • David from San Marcos, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I ordered a new thermostat and installed it in less than 15 minutes. Looks like the problem is fixed. Now ,the freezer cycles on and off correctly. The part was ordered on a Monday and I got it the next day. I am very satisfied.
Was this helpful?
Thank you for voting!
thermostate stop working frozzen up
  • Augusto from Gretna, LA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
just like the video show sa 1,2,3 yeaaa thanks
Was this helpful?
Thank you for voting!
coils would freeze over not allowing air to circulate throughout freezer
  • robert from royal oaks, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
replace thermostat and timer after defrosting and cleaning out freezer. I took less than 10 minutes and now freezer has a defrost cycle that eliminates frost buildup on the coils.
Was this helpful?
Thank you for voting!
Temp skyrocketed
  • Wayne from Chatham, IL
  • Really Easy
  • Less than 15 mins
Took out three shelves. Removed 9 screws with a battery powered drill with a phillip screwdriver bit. Popped off the thermostat like I had seen on the video. Put the new thermostat on. Replaced the two wires one at a time. Reassembled the unit. This was so quick that my wife told me to let her know when I wanted to fix the freezer. She wa s shocked that I had completed the job. I'd been in the garage less than 10 minutes. It has been six weeks. and the freezer is working perfectly.
Was this helpful?
Thank you for voting!
Evaporator Fan Motor was making loud rattling sound.
  • Richard from Clovis, NM
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Unplugged freezer from electrical socket. Removed lower trays from freezer. Removed sound proof stripping from sides of back panel. Removed upper, lower and side screws from back, lower panel using No. 2 phillips screwdriver. Disconnected motor wires from quick disconnect power supply. Removed motor bracket from freezer back using nut dri ver. Removed motor from bracket using same nut driver. Replaced motor and screws in bracket. reattached quick disconnect. Attached fan blade to motor making certain to push blade on shaft securely. Replaced bracket to freezer back. Replaced back cover. Replaced stripping. Plugged into power supply. Total time 15-20 minutes.
Was this helpful?
Thank you for voting!
Freezer would not keep running and the temperature was too warm.
  • Edmond from Carroll, NH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Followed the sites instructions. Empty the bottom part of the freezer. Remove the screws. Move the panel out of the way. Easily remove the old part and replace with the new. Put the panel and screws back in place. The freezer works.
Was this helpful?
Thank you for voting!
Door wasn't sealing tight
  • Diane from Mercer, ME
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Loosened the screws all around the door, took out old gasket. Washed with bleach solution to remove mildew, wiped. Pushed new gasket into groove, tightened screws.
Was this helpful?
Thank you for voting!
Ice Build Up In Top Section Of Freezer
  • david from new port richey, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Took out top hinge bolts. Lifted door off. Set door on floor and removed all the screws holding gasket on. Replaced with new gasket after warming gasket with a hair dryer. Piece of cake, saved alot of money doing it myself! Thanx so much. David jones.
Was this helpful?
Thank you for voting!
Coils not Defrosting and stopped freezing
  • Joseph from Yulee, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Upluged power pulled freezer out from wall removed the two screws that holds the defrost timer unpluged defrost timer pluged new timer in mounted new timer back with the two screws pluged freezer back in and job was complete. Freezer working fine.
Was this helpful?
Thank you for voting!
Noisy fan
  • CRAIG from PRESCOTT VALLEY, AZ
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Remove the cover panel inside the freezer, remove and replace the fan motor (pull fan blades off old motor and push on the new one) and replace the cover.
Was this helpful?
Thank you for voting!
All Instructions for the FFU11FC2CW2
46 - 60 of 78