Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice crystals formed near gasket.
2 of 2 peoplefound this instruction helpful.
James H from KNOXVILLE, TN
A Bit Difficult
1- 2 hours
Socket set
Removed the freezer door which had an electrical cord routed through the lower hinge with a disconnect under the freezer. Job works better with two people. Working the gasket into place was a little tricky at the corners. The putty knife was helpful. Make sure door is not warped when replaced on freezer. If warped slightly the door c
... Read morean be twisted to make gasket fit evenly bottom to top on front edge. Hope this helps DIY folks.