FFHT2117LS3 Frigidaire Refrigerator - Instructions

Removed top shelf. Removed rail screw and old rail. Install new rail and use rail screw to secure.

Removed shelf from frig. Removed screw of broken rail. Replaced with new rail with screw. Very easy.

Unscrewed screw from back of shelf pulled broken part out of slot it holds in and replaced with new one screwed the piece back in place.

I (female) fixed it by just inserting the brackets. Easy as pie. I was so happy that they fit.

Removed the shelf and one screw on the back of the rail. Replaced rail and screw. Re-inserted the drawer and it was done.

This was not technical at all. The old door fell out and the replacement door snapped right into position. It was simple.

Easy peasy... took the shelf out of the fridge. Unscrewed the old rail. Screwed in the new one. Put the shelf back in. DONE!!!!

My local appliance repair shop said they would have to order the whole shelf in order to fix my problem. It was going to cost $50 and I'd have to wait 3 weeks.

Instead, I found you guys on the internet. The part cost $5 and I got in delivered in 2 days.... CAN'T BEAT THAT!!!!

Thanks

Simply removed screw from old rail, inserted it into new rail and connected the rail to the old shelf. A very easy fix and a money saver. Local techs wanted $75 just to come out and look at the problem. Local parts places didn't stock the part and gave an estimated delivery time of 3-5 weeks with a price $12 higher than you guys. I received the part from your company well within the promised maximum 5 day delivery time - 3 days! Thanks, you have a repeat customer.

Placed the new glass pan cover. No issues. The part was in original condition and fit perfectly. Thank you!

New Piece arrived and we just put it in. No problem. Very pleased with the service and the turnaround time was great. Thank you.

A single screw holds the part in place. The ONLY challenge is seating the new slide so that the screw hole in the glide matches the hole in the support assembly. Initially setting the glide into place mismatched by about 1/16 of an inch toward the back of the refrigerator. Firmly grasping the new part after mating it to the two receivers on the support assembly, pull it toward you until it clicks into place. The screw should mate cleanly to the new part without any difficulty. Make sure you get the right or left side part, as they are not interchangeable.

It simply snapped into place. No tools required. A very simple repair.

I just put the new one in with no problem

Very easy slid the new frame in loader the drawers.

received the part. looked at the directions. popped it on in about 30 seconds. and ty very much