- Home
- FFGC3626SBA
- Instructions
FFGC3626SBA Frigidaire Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
I broke the original knob when I dropped a picture on it.
4 of 4 people
found this instruction helpful.
-
prentice from CONROE, TX
- Very Easy
- Less than 15 mins
I carefully removed the knob from the paper package and gently placed it between my left hand thumb and index finger all the while watching for falling objects that might cause harm to the new knob.
After determining there were no threatening objects anxiously awaiting any misplacement of the knob that I desired to place on the stem ... Read more from the control area of the stove I quickly placed the knob over the stem and pushed with very little pressure unless it was safely installed.
After the installation I quickly went to the sofa and rested from the extreme labor that I performed from the difficult procedure.
After determining there were no threatening objects anxiously awaiting any misplacement of the knob that I desired to place on the stem ... Read more from the control area of the stove I quickly placed the knob over the stem and pushed with very little pressure unless it was safely installed.
After the installation I quickly went to the sofa and rested from the extreme labor that I performed from the difficult procedure.
Read less
Was this helpful?
Thank you for voting!
Gas stove won’t light on half the appliance
4 of 9 people
found this instruction helpful.
-
Julieta from ELMIRA, NY
- A Bit Difficult
- 1- 2 hours
-
Screw drivers, Socket set
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow
... Read more
er and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.
Read less
Was this helpful?
Thank you for voting!