FFGC3026SBD Frigidaire Cooktop - Instructions

I carefully removed the knob from the paper package and gently placed it between my left hand thumb and index finger all the while watching for falling objects that might cause harm to the new knob.
After determining there were no threatening objects anxiously awaiting any misplacement of the knob that I desired to place on the stem ... Read more from the control area of the stove I quickly placed the knob over the stem and pushed with very little pressure unless it was safely installed.
After the installation I quickly went to the sofa and rested from the extreme labor that I performed from the difficult procedure.

Was easy...I pulled oven out from the wall so I could get to the back.i used a nut driver to remove small silver cover.matched up wires to the never module and re installed.pluged oven back in and burners lit perfectly

Replaced the ingintion module, still did not work, replaced the burner complete with new ingiter , it now works but another one quit . the front right one has 5 ohms resistance ,replaced with new one with 0 ohms, the back left has 2 ohms resistance and now it does not work , will need to replace that burner allso. too bad you can't buy ju ... Read more st the spark module for the burner.

Took 6 screws out holding the top on from the sides. Lifted the top front, popped out the spark module, Took 6wires off & reversed the processed to install the new one. I was really amazed when I ordered it Wednesday and it arrived on Friday. Believe me I bookmarked this site.

Repaired under warranty