This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have br...Read moreoken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
This run capacitor supports the compressor by storing and releasing electrical energy for smooth startup and operation. It helps maintain consistent cooling performance and efficiency. Replacing a faulty capacitor can resolve issues like clicking sounds, failure to start, or reduced cooling.
This is a plastic OEM drain plug that is attached to the drain system of your appliance and is compatible with several different makes and models of refrigerators, freezers, and air conditioners. This drain plug is used to prevent water from leaking out of the incorrect drain system within the appliance and is normally removed for cleanin...Read moreg and maintenance. If you notice water leaking inside of your appliance, the plug may be improperly positioned or may need replacing. To replace, simply pull off the damaged plug and insert the new plug in its place.
A filter-drier in a refrigerator has two essential functions. The first is to absorb system contaminants, such as water, which can create acids. The second is to provide physical filtration. This means trapping moisture, small metal chips, and dirt found in the refrigerant gas. If your refrigerator motor is constantly running, but the ref...Read morerigerator is not getting cold, the issue could be due to a damaged or faulty filter-drier. Faulty filter-driers are sometimes the cause for abnormal freezer compartment temperatures and partially frosted evaporators. This filter-drier is approximately 11 inches long. Remember to disconnect the power from your refrigerator before beginning this repair.
Engineered to precisely regulate freezer temperatures, this genuine OEM cold control kit manages the compressor cycling to maintain consistent cooling performance. By monitoring internal conditions through its capillary sensor, it helps prevent temperature fluctuations that can lead to spoiled or freezer-burned food. Designed as a complet...Read moree replacement solution, it restores proper startup, corrects continuous running issues, and ensures dependable operation. Built for durability and ease of installation, this component is ideal for bringing your appliance back to reliable, efficient cooling.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Improve space distribution
11 of 13 peoplefound this instruction helpful.
Elba from Kissimmee, FL
Really Easy
Less than 15 mins
Add the new basket in the side of the original, it is easier to access items from below the baskets. Excelent quality of the part. Thanks
Was this helpful?
Thank you for voting!
freezer would not start nor cool freeze
4 of 4 peoplefound this instruction helpful.
ivan from MERLIN, OR
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
remove 2 screws from thermostat cover on side of freezer pulled temp nob off then removed temp control and copper temp sense rod by pulling out then unhook wires then reverse procedure to put back together
Was this helpful?
Thank you for voting!
part was wrong size, but looked correct using the 1 inch grid on the picture on the website
4 of 4 peoplefound this instruction helpful.
Bruce from WALLING, TN
Very Difficult
More than 2 hours
Basket was way too small and would not work even though the picture with the grid on the website looked like it was very close to the correct size.
Don't use the grid to determine whether product is the correct physical size!