- Home
- FES353CCWD
- Instructions
FES353CCWD Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Control will not work - only clock blinks
0 of 4 people
found this instruction helpful.
-
Sue from Lampasas, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Took 3 panels off to get to the electric block. Replaced electrical block and put it back together. Still no change.
Was this helpful?
Thank you for voting!
Broken globe in oven and burnt out light bulb
0 of 5 people
found this instruction helpful.
-
Sharon from Foley, AL
- Really Easy
- Less than 15 mins
Easy as 1-2-3
Other Parts Used:
Was this helpful?
Thank you for voting!
Bake element went out on my oven
-
Jeffery from Union Point, GA
- Really Easy
- Less than 15 mins
-
Screw drivers
Took a screwdriver and removed screws attaching the element to the back of oven. Disconnectec the wires from the old bake element. Replaced the new reversing the process. Very easy.
Was this helpful?
Thank you for voting!
Stove door switch was broken
-
James from Milford, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
used two flat bladed screw drivers to get under edge of switch.. pried one side up and unit popped loose... removed electric connection (three prong recep) and plugged in new switch ..pushed into hole and was done... approximately 3 minutes..
Was this helpful?
Thank you for voting!
Needed new drip bowls
-
Judith from Jewell, IA
- Really Easy
- Less than 15 mins
The hardest part of the job was cleaning under the old rings. Cook top looks new again!
Other Parts Used:
Was this helpful?
Thank you for voting!
Could not find drip plates in local stores
-
Pat from Hendersonville, NC
- Really Easy
- Less than 15 mins
Just put the drip plates in stovetop and worked perfectly
Other Parts Used:
Was this helpful?
Thank you for voting!
stove top element burned out & drip pans needed replacing
-
genese from brantely, AL
- Really Easy
- Less than 15 mins
was very easy to replace the element, just pulled the old element out and eased the replacement in. was happy to find partselect.com to order what i needed. the order was filled correctly & delivered in a few day. it was good to be able to review how other problems could be solved & what parts to order
Other Parts Used:
Was this helpful?
Thank you for voting!
Replaced burner block
-
Glenn from Fossil, OR
- Really Easy
- Less than 15 mins
-
Screw drivers
Looked at the instructions and cut the wires, put the new wires in the block, attached the block to the range, put the new wires to the range wires using the wire nuts. I plugged the element into the block turned on the power, tried the element and it worked. It was really a easy repair.
Was this helpful?
Thank you for voting!
heating element didn't work
-
Judith from Sidney, NY
- Really Easy
- Less than 15 mins
I did the repair in less then 5 minutes. I took out old element and put in new one and turned it on and I had heat. Works great Thanks the part came in 2 days what a wonderful suprise that was.
Was this helpful?
Thank you for voting!
Door gasket was worn, stained and needed replaced
-
BETSY from HENDERSONVILLE, NC
- Really Easy
- Less than 15 mins
Gasket has pins that line up with tiny holes around the perimeter of door. Just pull the old gasket off, and snap new one ( with pins) in . Used the butter knife to push ends of gasket in hole at bottom of door. Took about 2 minutes to complete and looks AWESOME! simple. simple, simple! This company ships immediately and the product is d
... Read more
escribed properly. I would buy from this company again!
Read less
Was this helpful?
Thank you for voting!
8" left front surface element would no longer heat properly
-
Robert from Greencastle, PA
- Really Easy
- Less than 15 mins
I ordered the exact replacement element, and after unpacking it, it took about 5 minutes (actually,less; didn't time it), and the new element was installed and working fine.Thank you very much.
Was this helpful?
Thank you for voting!
drip bowls on stove rusty
-
Kenneth from Osseo, WI
- Really Easy
- Less than 15 mins
they were for my 90 year old mom. she dropped them in by herself, perfect fit....thanks very much
Other Parts Used:
Was this helpful?
Thank you for voting!
drip bowl purchased at local store was wrong size
-
james from lockport, NY
- Really Easy
- Less than 15 mins
purchased correct part from PartSelect and it fit like a glove!
Was this helpful?
Thank you for voting!
burner burned out
-
Charles from Kettlersville, OH
- Really Easy
- Less than 15 mins
unplugged old burner plugged new one in
Was this helpful?
Thank you for voting!
Heating element burned out
-
Jack from Hedgesville, WV
- Really Easy
- Less than 15 mins
-
Screw drivers
Took screws loose, unplugged old one plugged in new one put screws back
Was this helpful?
Thank you for voting!