My Orders
FEFL78CSD Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The front left dual element stopped regulating temperature
8 of 8 people
found this instruction helpful.
-
Miguel from PLANT CITY, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Replaced the dual element switch and that fixed it up
Other Parts Used:
Was this helpful?
Thank you for voting!
Draw Glide Broken Off Bottom Drawer.
9 of 11 people
found this instruction helpful.
-
Kathleen from fall river, MA
- Really Easy
- Less than 15 mins
New part arrived, opened pkg. , Pulled drawer out. . . Snapped in new parts. . . . Done!! Saved myself $100. 00.
Was this helpful?
Thank you for voting!
Element Burn out
25 of 60 people
found this instruction helpful.
-
Jesse from Forest, VA
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Self easy
PS Great service Super FAST.
Thanks Jesse
PS Great service Super FAST.
Thanks Jesse
Was this helpful?
Thank you for voting!
One section of heating element failed to heat.
7 of 7 people
found this instruction helpful.
-
Fred from VESTAL, NY
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers
Followed on-line instructions to remove the defective heating element. Some connection tabs on the replacement unit were different than the original. One tab was too wide to accept the stove's slip-on wire connector without fling down the tab width on the heating element. Thanks to some on-line instructions, wire connections to element 1a
... Read more
and 2a had to be reversed. If not for those instructions I would probably have ended up sending the unit back to the supplier, as an incorrect replacement !
Read less
Was this helpful?
Thank you for voting!
2 elements stopped working.
9 of 14 people
found this instruction helpful.
-
Ruth from MORGANTOWN, WV
- Really Easy
- 30 - 60 mins
-
Nutdriver
My husband followed the video instructions and it was easy to fix.
Was this helpful?
Thank you for voting!
Oven light bulb went dark; it needed replacing
10 of 17 people
found this instruction helpful.
-
Lise from CEDAR GROVE, NJ
- Very Easy
- Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
Error message on display ff30
7 of 8 people
found this instruction helpful.
-
Roger from CHICAGO, IL
- Really Easy
- Less than 15 mins
-
Pliers
Slid oven out removed one screw one plug replaced part took 5 minutes.told parts repair the error message and they sent me the correct part in two days will use them again saved me from Repair man wanted 85 dollars just to look at it my cost was 28 for probe and 8 dollars for shipping already helped neighbor with their stove they needed n
... Read more
ew ignighter 12 dollars repair place want 110 to come look at it this site walks you through repair best service!!!!
Read less
Was this helpful?
Thank you for voting!
Watch the video on line and it was really that easy to replaced the elements
6 of 6 people
found this instruction helpful.
-
Joseph from HATBORO, PA
- Very Easy
- Less than 15 mins
-
Screw drivers
Went very well and it works!
Was this helpful?
Thank you for voting!
Oven racks rusted
11 of 21 people
found this instruction helpful.
-
Wendell from Ocala, FL
- Really Easy
- Less than 15 mins
Ordered new racks and replaced them.
Was this helpful?
Thank you for voting!
Broken Drawer Glide
6 of 6 people
found this instruction helpful.
-
Sharon from Hamlin, NY
- Really Easy
- Less than 15 mins
It snapped right into the drawer, was very easy
Was this helpful?
Thank you for voting!
Oven wasn't heating properly for a few months and then stopped altogether
6 of 6 people
found this instruction helpful.
-
Matt from KENNETT SQ, PA
- Really Easy
- 15 - 30 mins
-
Socket set
The hardest part was pulling the oven away from the wall. Two bolts hold the sensor in place and a clip connects the electronics. Replacing the old one was trivial.
Was this helpful?
Thank you for voting!
Heating element broke
8 of 12 people
found this instruction helpful.
-
Joseph from Winter Park, FL
- Really Easy
- 15 - 30 mins
-
Socket set
Removed two screws in over pulled out part took off wires and put them on new elememt
Was this helpful?
Thank you for voting!
broken lens over oven light
11 of 22 people
found this instruction helpful.
-
Leslie from Warsaw, VA
- Really Easy
- Less than 15 mins
Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....
Was this helpful?
Thank you for voting!
Oven was not heating up
7 of 11 people
found this instruction helpful.
-
James from Acworth, GA
- Easy
- Less than 15 mins
-
Nutdriver, Pliers
Just cut the power to the rang and took the back off using a 1/4 nut driver then disconnected the wires then undone the screws holding the board in then put the new one back in plug the wires back where they belong ,put the back back on turn the power back on and that was it
Was this helpful?
Thank you for voting!
old element coil burned apart breaking the circuit.
6 of 8 people
found this instruction helpful.
-
James from WARRENTON, MO
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Screw drivers
removed the old burner and put the new one in it's place.
Was this helpful?
Thank you for voting!