FEFL77ABC Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Rear Drawer Glide
1 of 2 people
found this instruction helpful.
-
errol from bronx, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
Just use flat screwdriver to press on clip and just squeeze it in
Was this helpful?
Thank you for voting!
The front drawer glide broke off so one side of warmer drawer was sagging
1 of 2 people
found this instruction helpful.
-
Lamar from Theodore, AL
- Really Easy
- Less than 15 mins
After researching on what exactly to call the part, which was a front drawer glide. I found this out by watching the video. It showed me exactly what I needed and what it looked like. I run to the oven to look at the other one, to make sure thats what I needed, and it looked like the part that I needed (mind you I am a female, and not a
... Read more
repair person), so this video helped me out alot. When the part arrived, I knew how to take the drawer out, and easily snapped the little plastic glide in to place, and slipped the drawer back on the gliders, and it worked perfect, so proud of myself, that I done it by myself, with no help from husband. I bragged and bragged on myself with a big pat on my own back, thanks Part Select, I know what to do when it happens again. Its my fault cause it broke, cause I overload the drawer with pots and pans LOL!!! Brenda Dixon
Read less
Was this helpful?
Thank you for voting!
Arcing could be heard (and later seen) inside the switch
3 of 8 people
found this instruction helpful.
-
Joel from North Mankato, MN
- Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Switch was easy to replace. Some hex head screws to remove the panel and two screws to remove the switch. Though the plug in positions were totally different, all the quick connect terminals were marked on both switches.
Was this helpful?
Thank you for voting!
oven door BROKEN GLASS
4 of 11 people
found this instruction helpful.
-
elizabeth from fall river, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove two screws from bottom of inside oven door slide oven door up of hinges in side of door has 2 more screws when removing hold handle it does come off at very bottom of door remove all screws cover comes off remove new glass from package and place over brackets put oven door cover back on put screws back on slide back on bracket pu
... Read more
t last screws on
Read less
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people
found this instruction helpful.
-
Denise from Landover, MD
- Really Easy
- Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
No Power to the Oven
1 of 3 people
found this instruction helpful.
-
Tony from Hartford, CT
- Really Easy
- Less than 15 mins
-
Screw drivers
Watching the video showed an easy, unscrew and screw back on process while connecting the wires back. It was really that simple. Once it was complete (not even 10mins), plugged it back in, and its been working great since.
Was this helpful?
Thank you for voting!
Broken-Missing Front Drawer Glides
0 of 1 people
found this instruction helpful.
-
Michael from Anchorage, AK
- Really Easy
- Less than 15 mins
They snap right into place in the holes at the front of the stove and the drawer is then slid back onto the glides and works properly once again.
Was this helpful?
Thank you for voting!
missing drawer glide
0 of 1 people
found this instruction helpful.
-
Barbara from Cambridge City, IN
- Really Easy
- Less than 15 mins
Pulled out the bottom drawer of the stove. Attached the new drawer glide to the drawer. Replaced the drawer and it worked like new!
I received the part two days after I had ordered it. I was very pleased with the speed of the service and the ease with which I found the part I needed on the web site. I will use your site aga ... Read more in if needed.
I received the part two days after I had ordered it. I was very pleased with the speed of the service and the ease with which I found the part I needed on the web site. I will use your site aga ... Read more in if needed.
Read less
Was this helpful?
Thank you for voting!
Original rear glides had broken
0 of 1 people
found this instruction helpful.
-
Jeff from Irvine, CA
- Really Easy
- Less than 15 mins
Took the new parts out of the bags, slipped them into place and had the drawer working flawlessly in less than 5 minutes!
I surprised myself.
I surprised myself.
Was this helpful?
Thank you for voting!
Broken drawer glide
0 of 1 people
found this instruction helpful.
-
Mary from North Beach, MD
- Really Easy
- Less than 15 mins
Simply secured new glide into slot. I was more impressed at how easy this company made it for me to find the part I needed. And, they shipped immediately. This company is great.
Was this helpful?
Thank you for voting!
Replacing broken parts
0 of 1 people
found this instruction helpful.
-
Barry from Sarasota, FL
- Really Easy
- Less than 15 mins
Wow! That was simple! I did not even have to run all over town looking for the parts. I just hopped on the web, checked out the online diagrams, ordered and the parts showed up in the mail within a few days. It could not have been easier. Parts Select is now in my bookmarks for future use.!
Thanks guys
Thanks guys
Other Parts Used:
Was this helpful?
Thank you for voting!
Draw would fall into the floor when opened
0 of 1 people
found this instruction helpful.
-
Tracy from Frankfort, KY
- Really Easy
- Less than 15 mins
I watched the video before ordering the part. When it arrived, I knew exactly what to do. No tools were needed. It took me 2 tries to get the drawer aligned properly but the whole repair took about a minute. The video was invaluable!
Was this helpful?
Thank you for voting!
I had a broken front drawer glide on my range.
0 of 1 people
found this instruction helpful.
-
Mike from Everett, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Easy repair, I used a screw driver to pry out the broken part and no tools were required to put in the new part.
Was this helpful?
Thank you for voting!
drawer wouldn't fit flush
0 of 1 people
found this instruction helpful.
-
Gary from Milford, DE
- Really Easy
- Less than 15 mins
-
Pliers
removed drawer - removed broken drawer glides. new glides clip in very easy
Other Parts Used:
Was this helpful?
Thank you for voting!
Drawer was hard to close
0 of 1 people
found this instruction helpful.
-
Catherine from Washington, GA
- Really Easy
- Less than 15 mins
I am a 74 year old single woman. I removed the drawer and replaced the guide which has been missing for some time. Wish I had none about your company a long time ago.
Thank you
Thank you
Was this helpful?
Thank you for voting!