Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burner switch work sometime.
3 of 4 peoplefound this instruction helpful.
junius from WICOMICO, VA
Really Easy
1- 2 hours
Nutdriver
I follow the video on your site
Was this helpful?
Thank you for voting!
Change on e of the inside glass
4 of 7 peoplefound this instruction helpful.
Ronald from Ozone Park, NY
Easy
1- 2 hours
Screw drivers
removed the screws holding the front part of the door and from there worked my way, untill the third glass. It took a couple hours, my first time,. Overall easy,
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 peoplefound this instruction helpful.
Marilyn from Clearwater, FL
Easy
Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience
... Read morewith those in need of you services. Thanks. Marilyn Kasson
Read less
Was this helpful?
Thank you for voting!
N/A
4 of 7 peoplefound this instruction helpful.
Dineshbhai from Rincon HWY21, GA
A Bit Difficult
Less than 15 mins
Screw drivers
I had open back cover and remove the switch than replace new switch. Makesure cable conection.
Was this helpful?
Thank you for voting!
Broken hoven door handle
3 of 4 peoplefound this instruction helpful.
Mayola from RIO RICO, AZ
Really Easy
Less than 15 mins
Screw drivers, Wrench (Adjustable)
Screw the handle, that it...
Was this helpful?
Thank you for voting!
The part I ordered has 5 connections and the part to be replaced has 7 connections. I had to ask a friend who is expert in electrical wiring to help.
2 of 2 peoplefound this instruction helpful.
Phin from HARRISBURG, PA
Difficult
1- 2 hours
Pliers, Screw drivers
My friend used a tester to determine where each wire was supposed to connect to. I'm not sure what he did with the extra connections. Bottom line is this part should work but you need an expert to do it for you because it's, like I said, not exactly like the one to be replaced.
Was this helpful?
Thank you for voting!
Old part was replaced by mfg’r. Wiring different. No drawings or any info was included to show wiring.
2 of 2 peoplefound this instruction helpful.
Nelson from FRUITHURST, AL
Difficult
30 - 60 mins
Nutdriver, Screw drivers, Socket set
I was forced to call in a pro repairman. Will cost me at least $150 for part and repairman. I could have done job if instructions on how to rewire had been included.
Was this helpful?
Thank you for voting!
Burner not controlable
2 of 2 peoplefound this instruction helpful.
Royce from KEENE, TX
Very Easy
Less than 15 mins
Screw drivers
Removed rear panal, removed screws from of switch. Unplued wires and installed new switch and put back together. Very easy.
Was this helpful?
Thank you for voting!
Stove was dropped and had broken, bent frame and adjuster feet
2 of 2 peoplefound this instruction helpful.
Paul from PORT ORANGE, FL
Really Easy
15 - 30 mins
Screw drivers
New ones fit perfectly. Take a minute to bend the frame straight. Then and I used oversize screws on the replacement parts as the drop had stripped out the screw holes of the frame.
Was this helpful?
Thank you for voting!
The range element was not coming on
2 of 2 peoplefound this instruction helpful.
William from BENTON, IL
Really Easy
15 - 30 mins
Socket set
After settling that it was the Surface Element Switch, ordering and securing the switch, the first step was to disconnect the power to the Oven/Range. Next pull out the Range and remove the back and disconnect the switch from the top of the Range. Using the new switch I removed the wire connectors from the old switch and reconnected them
... Read moreto the new switch in the same spot that they came from. After connections were secure I reattached the switch to the back of the Range and reattached the back of the Range. When everything was back in place the power source was reconnected and that was it.
Read less
Was this helpful?
Thank you for voting!
problem pulling out bottom tray on range
2 of 2 peoplefound this instruction helpful.
rosetta from COLUMBIA, VA
Really Easy
Less than 15 mins
just put in slot
Was this helpful?
Thank you for voting!
Original utility drawer assembly was damaged
5 of 11 peoplefound this instruction helpful.
Randy from Phoenix, AZ
Really Easy
15 - 30 mins
Screw drivers
Assembled liner, panel and drawer. Installed the drawer guides and slid complete assembly in place.
I had to replace the switch on one of the large elements. It could and should have been a quicker repair if there would have been some installation/wiring instructions included with the part. Other than that the repair went well.
Was this helpful?
Thank you for voting!
I could can not control the burner
3 of 6 peoplefound this instruction helpful.
German from Houston, TX
Really Easy
15 - 30 mins
Nutdriver
was easy open the back side of the range and change the part, the only issue was the wire I used the diagram
My Orders
