FEFL74ASF Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Storage drawer hard to open and was hanging down on one side.
1 of 2 people
found this instruction helpful.
-
Nathan from ST Joseph, MN
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the drawer, removed and replaced the guides on both sides in the front and replaced the drawer.
Was this helpful?
Thank you for voting!
oven door BROKEN GLASS
4 of 11 people
found this instruction helpful.
-
elizabeth from fall river, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove two screws from bottom of inside oven door slide oven door up of hinges in side of door has 2 more screws when removing hold handle it does come off at very bottom of door remove all screws cover comes off remove new glass from package and place over brackets put oven door cover back on put screws back on slide back on bracket pu
... Read more
t last screws on
Read less
Was this helpful?
Thank you for voting!
One Of The Front Drawer Guides Broke
1 of 2 people
found this instruction helpful.
-
RICHARD from WABASH, IN
- Really Easy
- Less than 15 mins
Removed the drawer. Inserted the new glide tab into a hole in the side. Inserted the drawer slides in the the glide. Closed drawer--done! Works fine. Probably only 5-10 minutes.
Was this helpful?
Thank you for voting!
Drawer glides were snapped off
1 of 2 people
found this instruction helpful.
-
MICHELLE from STOUGHTON, MA
- Really Easy
- Less than 15 mins
The drawer under the oven had been aggravating me for some time. It was titled and did not close right. Finally, I took it out to see what the problem was and noticed that the glides were broken. I googled the model no. of the stove (figuring I would have no luck) and to my great relief was directed to this EXCELLENT site. I ordered
... Read more
the new drawer glides within minutes and they were literally delivered the next day. Snapped right in, fixed, happy!! It's times like this when I can't figure out how we all lived without the internet!
Read less
Was this helpful?
Thank you for voting!
Arcing could be heard (and later seen) inside the switch
3 of 8 people
found this instruction helpful.
-
Joel from North Mankato, MN
- Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Switch was easy to replace. Some hex head screws to remove the panel and two screws to remove the switch. Though the plug in positions were totally different, all the quick connect terminals were marked on both switches.
Was this helpful?
Thank you for voting!
No Power to the Oven
1 of 3 people
found this instruction helpful.
-
Tony from Hartford, CT
- Really Easy
- Less than 15 mins
-
Screw drivers
Watching the video showed an easy, unscrew and screw back on process while connecting the wires back. It was really that simple. Once it was complete (not even 10mins), plugged it back in, and its been working great since.
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people
found this instruction helpful.
-
Denise from Landover, MD
- Really Easy
- Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
Inner window on my Frigidaire electric stove oven cracked
1 of 3 people
found this instruction helpful.
-
Jonathan M. from Sierra Madre, CA
- Easy
- 1- 2 hours
-
Pliers, Screw drivers, Wrench (Adjustable)
On this website, I found an instruction manual for this stove. There were 2 pages about how to change the glass on the oven door, including diagrams. I'd also checked a generic youtube video on changing inner glass on oven doors too, although the hinges in the youtube demo weren't exactly like those in mine. I printed out the instruct
... Read more
ions, checked the oven door to make sure the hinges looked like those in the diagrams, set aside a couple of hours on a free day with no other distractions, and did the job. I just kept removing screws from the inside oven door, peeling back the layers of the onion, until I got to the innermost glass, which was cracked. Put the new glass in, put it back together. On youtube the guy said it would take 20 minutes. It took me about an hour. Saved a ton of money by doing it myself.
Read less
Was this helpful?
Thank you for voting!
Lens cover for oven light broke.
0 of 1 people
found this instruction helpful.
-
Amy from Corona, CA
- Really Easy
- Less than 15 mins
Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.
Was this helpful?
Thank you for voting!
Had broken and missing parts.
0 of 1 people
found this instruction helpful.
-
Calvin from Versailles, MO
- Easy
- 15 - 30 mins
Removed drawer and replaced broken and missing parts. Very easy when you have correct parts.
Other Parts Used:
Was this helpful?
Thank you for voting!
Broke guides while house moving.
0 of 1 people
found this instruction helpful.
-
Steve from Charlotte, MI
- Really Easy
- Less than 15 mins
The on-line video made it real easy.
Other Parts Used:
Was this helpful?
Thank you for voting!
broken glide
0 of 1 people
found this instruction helpful.
-
robert from kettering, OH
- Really Easy
- Less than 15 mins
snapped new glide in place.
Was this helpful?
Thank you for voting!
Replacing broken parts
0 of 1 people
found this instruction helpful.
-
Barry from Sarasota, FL
- Really Easy
- Less than 15 mins
Wow! That was simple! I did not even have to run all over town looking for the parts. I just hopped on the web, checked out the online diagrams, ordered and the parts showed up in the mail within a few days. It could not have been easier. Parts Select is now in my bookmarks for future use.!
Thanks guys
Thanks guys
Other Parts Used:
Was this helpful?
Thank you for voting!
Drawer glide broken on electric range
0 of 1 people
found this instruction helpful.
-
William from Broadview Heights, OH
- Really Easy
- Less than 15 mins
Found correct parts on Partselect.com, watched the instructional video, ordered the parts and installed them when they arrived. Very simple, very easy.
Other Parts Used:
Was this helpful?
Thank you for voting!
The sliding drawer at the bottom of my stove would not stay in position.
0 of 1 people
found this instruction helpful.
-
Terri from Findlay, OH
- Really Easy
- Less than 15 mins
I pul;led out the drawer and inserted the front glide in about 2 seconds and slid the drawer back in! Presto--fixed!
Was this helpful?
Thank you for voting!