- Home
- FEF387CCSA
- Instructions
FEF387CCSA Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element caught on fire
4 of 7 people
found this instruction helpful.
-
Judy from Spencerville, OH
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
First we turned off the electic, then we took the back off the stove and pulled the wire off the bad element then replace the new element. It was very easy to do.
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 people
found this instruction helpful.
-
Marilyn from Clearwater, FL
- Easy
- Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience
... Read more
with those in need of you services. Thanks. Marilyn Kasson
Read less
Was this helpful?
Thank you for voting!
Old heating element broke
2 of 2 people
found this instruction helpful.
-
Paul from Ellenville, NY
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Drank a beer, grabbed a screwdriver & tried to remove the two screws that held the element in place. The screws were old and when I turned them, they stripped instantly. This required another beer. Eventually I used pliers to grip the sides of the screws to remove and reinsrt them. When I finished the oven worked great, so I celebrated wi
... Read more
th another beer.
Read less
Was this helpful?
Thank you for voting!
Broiler element burnt out. It literally broke off & emitted white-hot sparks.
2 of 2 people
found this instruction helpful.
-
MG from ENCINITAS, CA
- Easy
- 30 - 60 mins
-
Screw drivers
First thing I did was turn off power to the range at the circuit breaker. The repair was generally easy with the exception that 1 screw holding the broiler element support was "welded" into the oven ceiling. I stripped the screw trying to get it out. Fortunately, I had a special tool that allows one to grip the outer edge of the screw w
... Read more
hile turning it --- and that's how I got it apart. Once the broiler element support was off, I removed 2 screws holding the broiler element itself to the oven wall and carefully pulled the broiler element out from the oven wall and detached the wire clips connecting the wires to the broiler element. I reattached the clips onto the new element and installed the new element back into the oven wall. I then reattached the broiler element support using a another screw (because I decimated the original one). I then turned the circuit breaker back on and turned the broiler on. Woila. My broiler works again! Special thanks to the people at this site who were very helpful in seeing to it I got the correct broiler element. The original ordered broiler element was delivered to the wrong address. The folks at this site sent me another one. To make a long story short, they saw to it I got the correct part. I highly recommend this site based on my experience with them.
Read less
Was this helpful?
Thank you for voting!
Oven bake element failed.
2 of 2 people
found this instruction helpful.
-
Gerald from PALM COAST, FL
- Easy
- 15 - 30 mins
-
Nutdriver
I watched the video of the repair. It was very easy; removed 2 screws; disconnected 2 push-on tabs; removed the element; and then reversed the operation. Be sure to turn off the circuit breaker that powers the oven before you start the repair. Turn it back on when finished and test the oven.
Was this helpful?
Thank you for voting!
Element burnt out and cracked
2 of 2 people
found this instruction helpful.
-
Robert from LOUISVILLE, KY
- Very Easy
- 15 - 30 mins
-
Nutdriver
I simply followed the instructions in your video. i shut down the power to the oven via the breaker panel, removed the two quarter inch screws with a nut driver, pulled out the old element exposing the two wire leads,disconnected one lead at a time and duct taped each lead to the oven wall,. Then removed the old element and replaced th
... Read more
e new one in reverse order. Voila! It works great. This is the second element I replaced in this oven over the years. This site was prompt on shipping the new element (about 3 days since I ordered on a Sunday).. It was well packed and arrived on time and I even got an e-mail letting me know it arrived! How cool is that?! I've been a customer for a few years now and plan to be a "forever" customer. Thanks for saving the day! You ROCK!
Read less
Was this helpful?
Thank you for voting!
oven door not closing completely
2 of 2 people
found this instruction helpful.
-
David from BIRDSBORO, PA
- Very Easy
- 15 - 30 mins
older range required no tools to repair, pulled old gasket out of notches at bottom of door, popped clips out of pre-drilled holes, folded new gasket ends {2 inches} and pushed into door, pushed clips into place.
Was this helpful?
Thank you for voting!
bake element burnt out.
2 of 2 people
found this instruction helpful.
-
james from WOOTON, KY
- Really Easy
- 15 - 30 mins
-
Screw drivers
removed screws,unplugged terminal leads,installed new one,back in business.
Was this helpful?
Thank you for voting!
Bottom oven element non-functional
2 of 2 people
found this instruction helpful.
-
Louis from GAINESVILLE, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Shut off power - throw breaker. Oven access easier with door removed - requires removal of two Phillips head screws. Remove two screws holding element in place using 1/4" socket. Pull element & wires out and pull slide in connectors out (had to hold the wire end with needle nose pliers}. Installed element by reversing the removal proc
... Read more
edures. Also good time to clean oven.
Read less
Was this helpful?
Thank you for voting!
Broken handle on the lower door
2 of 2 people
found this instruction helpful.
-
Robert from Albuquerque, NM
- Really Easy
- 15 - 30 mins
-
Screw drivers
I removed the screws holding the element in place. Then I screwed in the new part. No problem at all.
Was this helpful?
Thank you for voting!
Old part was replaced by mfg’r. Wiring different. No drawings or any info was included to show wiring.
2 of 2 people
found this instruction helpful.
-
Nelson from FRUITHURST, AL
- Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers, Socket set
I was forced to call in a pro repairman. Will cost me at least $150 for part and repairman. I could have done job if instructions on how to rewire had been included.
Was this helpful?
Thank you for voting!
The baking element developed hot spots and stoped working.
2 of 2 people
found this instruction helpful.
-
Jeremiah from Crawfordsville, IA
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
I removed the baking racks then unscrewed the default screws for the baking element.I then disconnected the electrical leads from the damaged element. I then removed the old damaged baking element and installed the new baking element, attaching the electrical leads after cheking for weak spots in the element. I then re installed the bakin
... Read more
g racks and started the oven to burn off any factory oils on the baking element.
Read less
Was this helpful?
Thank you for voting!
Door handle was cracked due to a loose screw.
2 of 2 people
found this instruction helpful.
-
Marilynn from Bridgewater, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
Lifted the drawer out from the oven and removed top and bottom screws. Replaced the handle and tightened the screws.
Was this helpful?
Thank you for voting!
Bad element
2 of 2 people
found this instruction helpful.
-
david from PERRY, ME
- Very Easy
- Less than 15 mins
-
Screw drivers
Remove screws pull off wires and install new parts
Was this helpful?
Thank you for voting!
Bake element (bottom of oven) burnt through and snapped in two
2 of 2 people
found this instruction helpful.
-
Amber from CARLISLE, PA
- Very Easy
- Less than 15 mins
-
Screw drivers
Unplug the oven, remove oven racks, unscrew 2 screws at the base of oven bake element, pull the terminals off the wire bases, plug terminals back in, put screws back in place, plug in oven and test that it works...
Was this helpful?
Thank you for voting!