EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FEF369HCF Frigidaire Range - Instructions

All Instructions for the FEF369HCF
61 - 75 of 126

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
NO HEAT IN UPPER ELEMENT
2 of 2 people found this instruction helpful.
  • Jerome from WOOD LAKE, MN
  • Really Easy
  • 30 - 60 mins
  • Socket set
NEED A QUARTER INCH SOCKET FOR THE BOLTS. REMOVE THE BACK PANEL AND THEN YOU WILL SEE THE TWO ELECTRIC WIRES GOING TO THE TERMINALS OF THE ELEMENT. DISCONNECT AND THEN GO TO THE FRONT OF OVEN AND REMOVE THE FOUR BOLTS THAT HOLD IN THE TOP ELEMENT. SIMPLY, VERY SLOWLY PULL THE ELEMENT FORWARD UNTILL IT CLEARS THE BACK AND YOUR GOOD TO GO. DO NOT FORGET TO DISCONNECT THE POWER TO THE OVEN BEFORE YOU START!
Was this helpful?
Thank you for voting!
Range displayed error code F10
2 of 2 people found this instruction helpful.
  • Timothy from Palm City, FL
  • Very Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Unplugged range; removed back cover; removed old oven probe. Installed new probe; replaced cover; connected power and turned on range - that simple. My only issue was probe was shipped in bubble rap and unit was slightly damaged (bent). Once straightened, the probe could be installed. Probe should have been shipped in sturdy cardboa rd cylinder or box. I called customer service, they were very nice, and noted my feedback on my account in case the unit fails prematurely.
Was this helpful?
Thank you for voting!
Stove was dropped and had broken, bent frame and adjuster feet
2 of 2 people found this instruction helpful.
  • Paul from PORT ORANGE, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
New ones fit perfectly. Take a minute to bend the frame straight. Then and I used oversize screws on the replacement parts as the drop had stripped out the screw holes of the frame.
Was this helpful?
Thank you for voting!
Broiler element fried, found nothing in town, Part Select delivered in three days
2 of 2 people found this instruction helpful.
  • Gary from TULSA, OK
  • Really Easy
  • 15 - 30 mins
  • Socket set
Pulled oven out, took the screws out of back plate cover plate with socket wrench, pulled connectors out through the back, removed the door, pushed the element rods through the two holes, connected the two wires, screwed the element in, put the hangars on for the element, put the back plate on and turned the broiler on, worked great, put the range door back on and has been working great. Great company, hope not to use them again, but good to know they are there with my part.
Gary H.
Was this helpful?
Thank you for voting!
The range element was not coming on
2 of 2 people found this instruction helpful.
  • William from BENTON, IL
  • Really Easy
  • 15 - 30 mins
  • Socket set
After settling that it was the Surface Element Switch, ordering and securing the switch, the first step was to disconnect the power to the Oven/Range. Next pull out the Range and remove the back and disconnect the switch from the top of the Range. Using the new switch I removed the wire connectors from the old switch and reconnected them to the new switch in the same spot that they came from. After connections were secure I reattached the switch to the back of the Range and reattached the back of the Range. When everything was back in place the power source was reconnected and that was it.
Was this helpful?
Thank you for voting!
Oven bottom panel rusted away
2 of 2 people found this instruction helpful.
  • Ron from CINCINNATI, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed two screws removed and replaced panel.
Was this helpful?
Thank you for voting!
oven was over heating temp. of oven keep climbing
2 of 2 people found this instruction helpful.
  • Herbert from MARIETTA, OH
  • Very Easy
  • Less than 15 mins
  • Nutdriver
removed screws from back cover then pulled elect. plug apart. removed screw pulled out probe installed new probe put cover back on very easy only problem was that it said that 88% of time would fix the problem. will this time it didn't work oven still over heating.
Was this helpful?
Thank you for voting!
Oven temperature was not consistent.
2 of 3 people found this instruction helpful.
  • Kimberly from OWASSO, OK
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
I pulled the oven away from the wall, unplugged the cord, removed the back panel then removed the screw from the old sensor.
Was this helpful?
Thank you for voting!
Element burned out
2 of 3 people found this instruction helpful.
  • Jeff from BELLEVUE, WA
  • Difficult
  • More than 2 hours
  • Pliers, Screw drivers
The original instructions were to replace burner and plug wires back in the same plug they came from.
The problem is that the plug order had changed between parts.
Use a pencil to highligt the plug numbers on both new and old plugset, to fint the new plug positions. And need to reorient one of the burners to allow existing wir es to reach.
Was this helpful?
Thank you for voting!
wrong part received and returned
1 person found this instruction helpful.
  • Rhonda from PACHECO, CA
  • Very Difficult
  • More than 2 hours
I wanted the bracket for the oven heating element and received the bracket for the broiler.... part returned and now I am stumped about what my next move will be
Was this helpful?
Thank you for voting!
Element would not heat up
1 person found this instruction helpful.
  • Everett from Colchester, CT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Removed 2 screws located underneath the front lip of the range top. Lifted range top and supported. Removed the 2 screws at either end of the support bracket. This bracket holds the elements in position. Be careful not to let the elements fall out when removing. The elements are now free to replace. Swap out the old with the new and be su re to reconnect the wires to the correct terminals on the new element. I did 1 wire at a time so as to not make a mistake at reconnecting the wires. Then replace the support bracket with the 2 screws and lower the range top in place and put back the 2 screws that hold the range top in position. VOILA!! Success. It works. The wife is now happy again:)
Was this helpful?
Thank you for voting!
Oven would not reach temperature or it would finally reach temp but would not stay warm.
1 of 2 people found this instruction helpful.
  • Craig from FAYETTEVILLE, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Pulled oven away from cabinet area
Unplugged oven from wall outlet
Removed screws to free top panel from back of oven
Removed screws to free lower panel from back of oven
Probe backing was now exposed
Unplugged probe from connector
Removed one screw from probe housing
Twisted probe housing counterclock wise then pulled probe out
Reversed the process to install probe
Plugged probe into connector
Reversed the panel removal process
Plugged oven back in to wall outlet
Turned on oven and tested with no further issue
Was this helpful?
Thank you for voting!
Bottom oven pan was warped and discolored
2 of 5 people found this instruction helpful.
  • Kathryn from LAKELAND, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Unscrew the 2 screws at the back of the oven bottom pan in the range. Place new oven pan in and rescrew the 2 screws. I could not get the two screws screwed back in. Since the bottom pan cannot move from its position, I felt like the two screws were not necessary.
Was this helpful?
Thank you for voting!
temp. probe
1 of 2 people found this instruction helpful.
  • Deane from WINCHESTER, KY
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Easy watched on line video
Was this helpful?
Thank you for voting!
Inner window on my Frigidaire electric stove oven cracked
1 of 3 people found this instruction helpful.
  • Jonathan M. from Sierra Madre, CA
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers, Wrench (Adjustable)
On this website, I found an instruction manual for this stove. There were 2 pages about how to change the glass on the oven door, including diagrams. I'd also checked a generic youtube video on changing inner glass on oven doors too, although the hinges in the youtube demo weren't exactly like those in mine. I printed out the instruct ions, checked the oven door to make sure the hinges looked like those in the diagrams, set aside a couple of hours on a free day with no other distractions, and did the job. I just kept removing screws from the inside oven door, peeling back the layers of the onion, until I got to the innermost glass, which was cracked. Put the new glass in, put it back together. On youtube the guy said it would take 20 minutes. It took me about an hour. Saved a ton of money by doing it myself.
Was this helpful?
Thank you for voting!
All Instructions for the FEF369HCF
61 - 75 of 126