EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FEF369HCD Frigidaire Range - Instructions

All Instructions for the FEF369HCD
76 - 90 of 110

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Aluminum foil on bottem of oven melted and made a mess on new stove
  • Natalie from Beaverton, OR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed the oven bottom plate and removed. Put new one in place and screwed it in place. Stove looks brand new again and am so happy with the results.The part we received was a perfect match and arrived in a few days!
Was this helpful?
Thank you for voting!
put aluminum foil on bottom panel of oven to catch drips. Big mistake. adhered to oven in minutes.
  • jill from new boston, NH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 screws at rear of bottom panel. Removed old panel, replaced with new and screwed back in.Piece of cake. Plus this company was great to order from. received part the same day. Very happy. Would order through this company again.
Was this helpful?
Thank you for voting!
damaged bottom pan
  • Neal from Severna Park, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 back screws, lifted pan from rear and pushed front slightly forward/into oven until front lip cleared. Installed new pan in reverse order.
Was this helpful?
Thank you for voting!
When turning the switch on for the large eye I could hear an electrical short behind the switch.
  • Kent from McHenry, MS
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Initially we realized there was a problem while cooking with the large eyes and we began hearing an electrical short behind the control switch. I unplugged the power from the oven/cooktop and removed the back panel where I could visually see soot on the switches where it was shorted. Careful while choosing your part from the diagram on P artselect.com. For the model FEF336ECJ, atleast for my oven, the eye switches were reversed and I ordered the small eye's switches! Luckily they have an outstanding customer support and immediately mailed out the new parts and a label to send the wrong parts back. Changing the parts out was very simple. Pull the oven out and UNPLUG IT from any electrical outlet. Remove the back panel. Double check from the label on the front of the control panel that you are working with the correct switch, and before removing the current switch, remove the wires one by one and place them on the new part to make sure you don't misplace these wires. Once the wires are connected to the new part, pull the plastic knob off of the old switch to reveal the screws on front of the panel. Place the new switch where the old one came from and fasten the screws back in place. Replace the knob, replace the back panel(for safety) and test the new switch before you push the oven back into place. If you can turn a screw driver, move the oven, and unplug the power, this easy do it yourself repair will save you possibly hundreds by not calling a repair/handyman who would absolutely love you to pay out the nose for such an easy task.
Was this helpful?
Thank you for voting!
aluminum foil melted on oven bottom
  • Allen from wakefield, RI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
It cannot be cleaned as it welded itself to oven bottom. Two screws in back of oven bottom and it lifted right out. The new bottom says "do not use aluminum foil" Very easy repair.
Was this helpful?
Thank you for voting!
Broiler element broken
  • Robert from Newark, DE
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed broken element, four screws. Element ends were attached to the oven via wire clips. Removed those too. Placed clips on the ends of the new element and remounted to the top of the oven enclosure with the fours screens. Took twenty to twenty five minutes. We had Tbones a little while later. Saved over 125.00 for repairman.
Was this helpful?
Thank you for voting!
broiler element burned out.
  • Kellyjean from Springfield, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Unscrewed the old element (2) screws, then unscrewed the (2) brackets holding the element up, pulled the element out of the back wall of the oven unhooked the (2) electrical wires and left them hanging. Installation is in the exact reverse order.
Was this helpful?
Thank you for voting!
oven took too long to heat up
  • JAONNE from GAFILED, NJ
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
un bolted the 6 nut driver heads found probe wire un pluged it 1/4 turn from lock it was in and pull out replace slide in new probe 1/4 turn to lock it in place replace nut driver self tappers and test simple!!
Was this helpful?
Thank you for voting!
audible beeper stoped, lights quit
  • Ronald from Kinston, NC
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Socket set
Switch the main circuit breaker to off. Then unplug the oven from the recepticle socket. Use a 1/2" nut driver to remove the back panel. These are hold in by metal self tapping screws. With pencil / paper copy down the color coded wires and were they go. With a small blade screwdriver pry the plastic sockets so you can unplug the multi -pin connector. Using a #2 philips screwdriver remove the screws holding the controller board. Using the pocket knife carfully separate the front label panel from the old controller. This will be used on the new controller. Using the philip screws place the new controller in place and hand tighten. Remove the colored wires from the old controller and place them on the new controller. Insert the multi-pin connector into the socket on the new controller. Put the back panel on, plug the oven in and turn the circuit breaker to on.
Was this helpful?
Thank you for voting!
All Instructions for the FEF369HCD
76 - 90 of 110