Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burner switch work sometime.
3 of 4 peoplefound this instruction helpful.
junius from WICOMICO, VA
Really Easy
1- 2 hours
Nutdriver
I follow the video on your site
Was this helpful?
Thank you for voting!
Change on e of the inside glass
4 of 7 peoplefound this instruction helpful.
Ronald from Ozone Park, NY
Easy
1- 2 hours
Screw drivers
removed the screws holding the front part of the door and from there worked my way, untill the third glass. It took a couple hours, my first time,. Overall easy,
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 peoplefound this instruction helpful.
Larry from COZAD, NE
Really Easy
30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
N/A
4 of 7 peoplefound this instruction helpful.
Dineshbhai from Rincon HWY21, GA
A Bit Difficult
Less than 15 mins
Screw drivers
I had open back cover and remove the switch than replace new switch. Makesure cable conection.
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 peoplefound this instruction helpful.
Marilyn from Clearwater, FL
Easy
Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience
... Read morewith those in need of you services. Thanks. Marilyn Kasson
Read less
Was this helpful?
Thank you for voting!
problem pulling out bottom tray on range
2 of 2 peoplefound this instruction helpful.
rosetta from COLUMBIA, VA
Really Easy
Less than 15 mins
just put in slot
Was this helpful?
Thank you for voting!
Old part was replaced by mfg’r. Wiring different. No drawings or any info was included to show wiring.
2 of 2 peoplefound this instruction helpful.
Nelson from FRUITHURST, AL
Difficult
30 - 60 mins
Nutdriver, Screw drivers, Socket set
I was forced to call in a pro repairman. Will cost me at least $150 for part and repairman. I could have done job if instructions on how to rewire had been included.
Was this helpful?
Thank you for voting!
Original utility drawer assembly was damaged
5 of 11 peoplefound this instruction helpful.
Randy from Phoenix, AZ
Really Easy
15 - 30 mins
Screw drivers
Assembled liner, panel and drawer. Installed the drawer guides and slid complete assembly in place.
Removed rear panal, removed screws from of switch. Unplued wires and installed new switch and put back together. Very easy.
Was this helpful?
Thank you for voting!
Stove was dropped and had broken, bent frame and adjuster feet
2 of 2 peoplefound this instruction helpful.
Paul from PORT ORANGE, FL
Really Easy
15 - 30 mins
Screw drivers
New ones fit perfectly. Take a minute to bend the frame straight. Then and I used oversize screws on the replacement parts as the drop had stripped out the screw holes of the frame.
Was this helpful?
Thank you for voting!
burners 1 would not do anything burned out 2 when from normal to out of control heat would not keep a constance heat
2 of 2 peoplefound this instruction helpful.
rick from Delta, OH
Really Easy
15 - 30 mins
Pliers, Screw drivers
turned off breaker 3 Phil screws open door and on inside range top I would reconmend a board to hold top up square tip for cross bar and pliers to pull wires off fit perfect works really nice
was easy open the back side of the range and change the part, the only issue was the wire I used the diagram
Was this helpful?
Thank you for voting!
The switch wasn't working on all the different settings.
2 of 3 peoplefound this instruction helpful.
James from NEW HYDE PARK, NY
Very Easy
15 - 30 mins
Screw drivers
first thing was to turn the breakers off. then pull the range away from the wall. used an 1/8 th inch socket to take off the back panel to get access to the switch.used a Phillips screwdriver to disconnect the switch under the knob in the front. took off the wire terminals one at a time and matched it to the numbers on the old switch.repl
... Read moreaced the knob, screwed it on to the range. turned the breakers on and tested the switch.worked fine, replaced the back cover and pushed it back into place.
Read less
Was this helpful?
Thank you for voting!
Burner switch had gone bad.
4 of 9 peoplefound this instruction helpful.
Gregory from American Fort, UT
A Bit Difficult
15 - 30 mins
Nutdriver, Screw drivers
I had to replace the switch on one of the large elements. It could and should have been a quicker repair if there would have been some installation/wiring instructions included with the part. Other than that the repair went well.
Was this helpful?
Thank you for voting!
lens was broken
2 of 3 peoplefound this instruction helpful.
Kenneth from Coeur d'Alene, ID
Really Easy
Less than 15 mins
after pulling away from wall and unplugging remove 5 screws in upper back panel lift off being careful of sharp edges if part of lens is still in hole push it out towards the front insert lens from front of unit slide light assy over pin on back of lens replace back panel plug in range push back against wall check for level you're done
My Orders
