FEF366DBB Frigidaire Range - Parts

This front drawer glide supports the bottom storage or broil drawer, allowing it to slide smoothly in and out of the range. Designed to reduce friction and keep the drawer properly aligned, it helps ensure easy and stable operation. Replacing a worn or damaged glide can fix issues such as sticking, tilting, or uneven movement, restoring normal drawer function.

This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also known as your stove top. If you suspect that your surface element is not properly heating then you may want to test the element for continuity...Read more. This model is sold individually and is 1200 watts. The tools you will need for this installation include a Phillips screwdriver and a 14-inch nut driver.

This is a red indicator light lens for an oven that covers the indicator light for the surface element. The indicator light signifies when the element is on and heated. This part is sold individually. It is recommended to check other red indicator lights in case they need to be replaced because they often wear at the same rate. It is diff...Read moreicult to see the light without the red lens. This part does not include the light. If your light does not illuminate, you may want to consider ordering the light as well. Tools required for this repair are a 1/4 inch nut driver and a stubby Phillips screwdriver.

Handle only.

The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tipping when force or weight is applied to an open oven door. The bracket is secured to the floor and wall and fits over the rear leveling leg in ...Read morethe back of the appliance, in a cutout specifically designed for the anti-tip bracket. This part is very essential to the safe operation of the appliance. Failure to install the bracket properly can result in the oven tipping or falling and causing injuries.

This electronic oven control board serves as the central control unit for your range, regulating key functions such as temperature monitoring, heating element activation, and digital display management. It ensures precise control over baking and broiling operations while allowing users to program time and temperature settings. A malfuncti...Read moreoning control board may result in inconsistent heating, unresponsive touchpad input, error codes, or failure to start. Replacement is recommended if these symptoms occur, as the board plays a vital role in maintaining safe and accurate oven performance.

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

This is a genuine oven rack, which works with ranges.

This is the part the handle screws into for installation.

The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel to access the socket for the repair. You will also need to remove the current light bulb and the light lens cover so that the old socket can ...Read morebe removed. As you will be working around electrical circuits for this repair, be sure to disconnect the power source from the oven before you begin work on the oven.

Sold Individually.

This surface burner knob is used in ranges and ovens. The knob allows you to control the temperature on the surface burner located on the range. It has a D-shaped shaft and the measurements are: 4 inches in length, 5 inches in width, 1 inch in height, and it weighs 0.01 pounds. It comes in a black color with a white pointer. If your knob ...Read moreis broken, will not turn on or off, or it does not rotate, replacing this part can be the solution to your problem. Remember to unplug your range from the power source before beginning this project. Refer to the manual provided by the manufacturer for further installation instructions.