Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
One Of The Front Drawer Guides Broke
1 of 2 peoplefound this instruction helpful.
RICHARD from WABASH, IN
Really Easy
Less than 15 mins
Removed the drawer. Inserted the new glide tab into a hole in the side. Inserted the drawer slides in the the glide. Closed drawer--done! Works fine. Probably only 5-10 minutes.
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 peoplefound this instruction helpful.
Denise from Landover, MD
Really Easy
Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
Inner window on my Frigidaire electric stove oven cracked
1 of 3 peoplefound this instruction helpful.
Jonathan M. from Sierra Madre, CA
Easy
1- 2 hours
Pliers, Screw drivers, Wrench (Adjustable)
On this website, I found an instruction manual for this stove. There were 2 pages about how to change the glass on the oven door, including diagrams. I'd also checked a generic youtube video on changing inner glass on oven doors too, although the hinges in the youtube demo weren't exactly like those in mine. I printed out the instruct
... Read moreions, checked the oven door to make sure the hinges looked like those in the diagrams, set aside a couple of hours on a free day with no other distractions, and did the job. I just kept removing screws from the inside oven door, peeling back the layers of the onion, until I got to the innermost glass, which was cracked. Put the new glass in, put it back together. On youtube the guy said it would take 20 minutes. It took me about an hour. Saved a ton of money by doing it myself.
Oven would not get up or stay up to selected temperature
0 of 1 peoplefound this instruction helpful.
wondell from Winnemucca, NV
Easy
Less than 15 mins
Nutdriver
Pull stove out to get behind it,unplug temperature probe plug. Remove temp probe from oven by removing the screw holding it in place on back of oven. Cut plug off temp probe unit leaving as much lead wire as possible on plug end. Strip wires on new probe and end of plug wires(one quarter inch). Then I used two small butt connectors to joi
... Read moren the stripped wires,one for each pair of wires. Two small wire 'nuts' may also be used as the connections are outside the oven and not exposed to the heat of the oven while it is in operation. Hope this helps the inexperienced 'do it yourselfers'--:)
Read less
Was this helpful?
Thank you for voting!
Had broken and missing parts.
0 of 1 peoplefound this instruction helpful.
Calvin from Versailles, MO
Easy
15 - 30 mins
Removed drawer and replaced broken and missing parts. Very easy when you have correct parts.
Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.
Was this helpful?
Thank you for voting!
missing drawer glide
0 of 1 peoplefound this instruction helpful.
Barbara from Cambridge City, IN
Really Easy
Less than 15 mins
Pulled out the bottom drawer of the stove. Attached the new drawer glide to the drawer. Replaced the drawer and it worked like new!
I received the part two days after I had ordered it. I was very pleased with the speed of the service and the ease with which I found the part I needed on the web site. I will use your site aga
... Read morein if needed.
Read less
Was this helpful?
Thank you for voting!
Drawer Guides Broken
1 of 4 peoplefound this instruction helpful.
Charles from Petersburg, VA
Really Easy
Less than 15 mins
New ones just snapped into place it takes less than a minute
Was this helpful?
Thank you for voting!
Original rear glides had broken
0 of 1 peoplefound this instruction helpful.
Jeff from Irvine, CA
Really Easy
Less than 15 mins
Took the new parts out of the bags, slipped them into place and had the drawer working flawlessly in less than 5 minutes! I surprised myself.
Was this helpful?
Thank you for voting!
Broken drawer glide
0 of 1 peoplefound this instruction helpful.
Jeffrey from West Kingston, RI
Really Easy
Less than 15 mins
First i removed the drawer. Then i removed the broken drawer glide and replaced it with the new one. Then i put the drawer back! The parts were a perfect match...
Was this helpful?
Thank you for voting!
Broken drawer glide
0 of 1 peoplefound this instruction helpful.
Myles from Twin Falls, ID
Really Easy
Less than 15 mins
Screw drivers
I used a screw driver to pop the broken glide out and then snapped in the new one. The repair took all of about 30 seconds. It probably would have taken even less time if the former owner had not epoxied the broken piece in place.
Was this helpful?
Thank you for voting!
I accidently threw away the drawer glide, when it fell off one day b/c I didn't know what it was. Later on when I started pulling out the bottom stove drawer, I discovered that it wasn't gliding properly....duh...
0 of 1 peoplefound this instruction helpful.
Reginal from Tampa, FL
Really Easy
Less than 15 mins
I just placed the new glider in place and put the drawer back on its hinges and it was good to go... my wife was extremely happy
Was this helpful?
Thank you for voting!
drawer glides went in with just a push with a finger ,works great
0 of 1 peoplefound this instruction helpful.
carl from mashpee, MA
Really Easy
Less than 15 mins
pushed the glides in the proper holes and ,they work great now ,drawer opens and closes as easy as it should. will buy from again.
Was this helpful?
Thank you for voting!
Broken-Missing Front Drawer Glides
0 of 1 peoplefound this instruction helpful.
Michael from Anchorage, AK
Really Easy
Less than 15 mins
They snap right into place in the holes at the front of the stove and the drawer is then slid back onto the glides and works properly once again.
My Orders
