EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FEF366CSD Frigidaire Range - Instructions

All Instructions for the FEF366CSD
61 - 75 of 311

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Repaired Oven Range Light Bulb
3 of 3 people found this instruction helpful.
  • Alan from SAN MATEO, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Was this helpful?
Thank you for voting!
Right rear burner not working properly
3 of 3 people found this instruction helpful.
  • Dante from SOUTHOLD, NY
  • Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
After a brief discussion with CS about the electric stove part was shipped it arrived and I proceeded to install I found it needed to be installed sideways not up & down like the old one. The terminals did not line up so I put the black lead first and the purple lead last in doing that I burned out the switch??? was not easy to install as the video showed his switch matched each wire? My installation was sideways??
Was this helpful?
Thank you for voting!
Bottom element burned up
3 of 3 people found this instruction helpful.
  • Peggy from PORTLAND, OR
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I am 78 years old and I watched the how to video twice and then did it so if I can do it anyone can,oh and I am a woman
Was this helpful?
Thank you for voting!
my burners would just heat up solid red even when i had controls turned down to 2 or 3. i would have to turn controls off and back on, then they still would just go back to glowing red
3 of 3 people found this instruction helpful.
  • Leota from AUXVASSE, MO
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
This was my first time ever working with electrical issues. My husband is not physically able to do repairs now. Very easy fix. Just viewed video repair instructions and it went exactly as instructed. Within 45 minutes, I had my stove repaired and cleaned and back in working order!! Great results. My range is working perfectly again and M ama is happy!!
Was this helpful?
Thank you for voting!
Never received parts from PartSelect!!!
3 of 3 people found this instruction helpful.
  • Ralph from SULLIGENT, AL
  • Really Easy
  • 30 - 60 mins
It went easy, I ordered the part from another vendor, received it in 3 days and it only took about 20 minutes to install.
I do not recommend ordering from PartSelect!
Was this helpful?
Thank you for voting!
Broiler broke apart in pieces. Also we found an round honeycomb part
3 of 4 people found this instruction helpful.
  • Betty from KNIGHTDALE, NC
  • Really Easy
  • 30 - 60 mins
in the bottom of the oven when I was looking to see what was going on. My husband did the repair just as the video described. I suspect this part honeycomb round maybe ceramic piece goes over where the heat is vented from the oven. Where do I get another one of these and how does it attach in the oven-under t he burner. HELP I tried to look on the schematics and did not see anything. The repair went fine, except when we turned everything back on it did not work. Then my husband remembered he forgot to plug the new part IN. Once plugged in it is working fine. Thanks
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 people found this instruction helpful.
  • Larry from COZAD, NE
  • Really Easy
  • 30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
Burner switch work sometime.
3 of 4 people found this instruction helpful.
  • junius from WICOMICO, VA
  • Really Easy
  • 1- 2 hours
  • Nutdriver
I follow the video on your site
Was this helpful?
Thank you for voting!
Change on e of the inside glass
4 of 7 people found this instruction helpful.
  • Ronald from Ozone Park, NY
  • Easy
  • 1- 2 hours
  • Screw drivers
removed the screws holding the front part of the door and from there worked my way, untill the third glass.
It took a couple hours, my first time,. Overall easy,
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 people found this instruction helpful.
  • Marilyn from Clearwater, FL
  • Easy
  • Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience with those in need of you services. Thanks. Marilyn Kasson
Was this helpful?
Thank you for voting!
N/A
4 of 7 people found this instruction helpful.
  • Dineshbhai from Rincon HWY21, GA
  • A Bit Difficult
  • Less than 15 mins
  • Screw drivers
I had open back cover and remove the switch than replace new switch. Makesure cable conection.
Was this helpful?
Thank you for voting!
problem pulling out bottom tray on range
2 of 2 people found this instruction helpful.
  • rosetta from COLUMBIA, VA
  • Really Easy
  • Less than 15 mins
just put in slot
Was this helpful?
Thank you for voting!
Old part was replaced by mfg’r. Wiring different. No drawings or any info was included to show wiring.
2 of 2 people found this instruction helpful.
  • Nelson from FRUITHURST, AL
  • Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
I was forced to call in a pro repairman. Will cost me at least $150 for part and repairman. I could have done job if instructions on how to rewire had been included.
Was this helpful?
Thank you for voting!
Burner not controlable
2 of 2 people found this instruction helpful.
  • Royce from KEENE, TX
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Removed rear panal, removed screws from of switch. Unplued wires and installed new switch and put back together. Very easy.
Was this helpful?
Thank you for voting!
Original utility drawer assembly was damaged
5 of 11 people found this instruction helpful.
  • Randy from Phoenix, AZ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Assembled liner, panel and drawer. Installed the drawer guides and slid complete assembly in place.
Was this helpful?
Thank you for voting!
All Instructions for the FEF366CSD
61 - 75 of 311