- Home
- FEF311SAWH
- Instructions
FEF311SAWH Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lacking oven racks on used appliance
2 of 3 people
found this instruction helpful.
-
Katherine from Roanoke, VA
- Really Easy
- Less than 15 mins
Your website is great...easy and it literally took me no mote than 5 minutes to find what I needed and order...and received it VERY quickly. Must say I was dreading going to some parts house that we have in our town in bad area, and searching on dusty shelves for what I needed...am so glad I found you!!
Was this helpful?
Thank you for voting!
Bottom bake element went bad
2 of 3 people
found this instruction helpful.
-
James from Martinsburg, WV
- Really Easy
- Less than 15 mins
-
Nutdriver
Remove the 2 nuts holding the element in place. Pull the element out slightly to expose the wires. each side of the element has a wire. Slide the wires off. Replace new element. attach wires and pu the 2 screws back in the element holders.
Was this helpful?
Thank you for voting!
Oven bake element was dead
2 of 3 people
found this instruction helpful.
-
Stephen from Spencer, IN
- Really Easy
- Less than 15 mins
-
Pliers, Socket set
Turned off range/oven breaker. Opened the oven door. Removed two 5/16 hex head screws. Pulled bake element forward and removed the two slip on electrical connections from old bake element and put them on the new one. Replaced the two screws, closed the oven door, and proceeded to overhaul the kitchen faucet.
Was this helpful?
Thank you for voting!
heating element stopped working
2 of 3 people
found this instruction helpful.
-
Kevi from Verona, WI
- Really Easy
- Less than 15 mins
-
Wrench set
All I had to do was loosen the screws, pull out electrical hookup on both ends, hookup new heating element to elecric and screw em into place. That's it, super easy and I got the part in 2 day : )
Was this helpful?
Thank you for voting!
Oven lower element broke
2 of 3 people
found this instruction helpful.
-
Peggy from Owensville, MO
- Really Easy
- Less than 15 mins
-
Screw drivers
Take the screws out of the inside of oven for the element and slide the oven away from way and remove the back and insert the element to the clips and screw the back of the oven back together and plug in again and push back in place. Very easy for my husband to repair.
Was this helpful?
Thank you for voting!
Element did not heat
2 of 3 people
found this instruction helpful.
-
Susan from Iowa City, IA
- Really Easy
- Less than 15 mins
-
Screw drivers, Wrench set
After doing without the oven for a week or so we decided to turn to the internet and try doing the repair ourselves. We are not mechanically inclined/fix it yourself kind of people. This really was easy. Just detach the old element and attached the new one. A couple of bolts and snapping one out and then the new one in. Very simple
Was this helpful?
Thank you for voting!
lens was broken
2 of 3 people
found this instruction helpful.
-
Kenneth from Coeur d'Alene, ID
- Really Easy
- Less than 15 mins
after pulling away from wall and unplugging remove 5 screws in upper back panel lift off being careful of sharp edges if part of lens is still in hole push it out towards the front insert lens from front of unit slide light assy over pin on back of lens replace back panel plug in range push back against wall check for level you're done
Was this helpful?
Thank you for voting!
Bake Element burned in to stopped working
2 of 3 people
found this instruction helpful.
-
Debbie from Mineral Wells, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver
Turned off power to appliance removed the screws connecting the element. Disconnected the wires from the old element connected the new element replaced the screws and tightened turned power on turned power back on heated oven to be sure it worked. Very simple to do.
Was this helpful?
Thank you for voting!
bake element burnt out
2 of 3 people
found this instruction helpful.
-
Kim from Union Grove, WI
- Really Easy
- 15 - 30 mins
-
Nutdriver
I looked for the proper part on this site. I was even able to find a video on how to install the part. It was great to see the step-by-step directions and tools needed. I ordered the part. It came quickly so that I was able to get my oven repaired before my kids came home for spring break. The only problem I had was the old screws were re
... Read more
ally stuck on. I used some WD-40 and they were still quite stuck. I learned that by gently going back and forth with the nut driver, rather than just trying to turn in the correct direction, that the screws came out quite easily. I felt so proud to be able to fix my own stove and save money in the process! Very satisfying for a single mom. Couldn't have done it without the video directions.
Read less
Was this helpful?
Thank you for voting!
Burner switch had gone bad.
4 of 9 people
found this instruction helpful.
-
Gregory from American Fort, UT
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Screw drivers
I had to replace the switch on one of the large elements. It could and should have been a quicker repair if there would have been some installation/wiring instructions included with the part. Other than that the repair went well.
Was this helpful?
Thank you for voting!
oven not heating
1 person
found this instruction helpful.
-
janet*hubbard from Old Town, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
slid the old one out and slid the new one in.turned the unit on and it works
Was this helpful?
Thank you for voting!
bake element broken
1 person
found this instruction helpful.
-
Michael from Browns Mills, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
turn off power to oven at breaker box
remove screws holding bake element in
pulls wires off old element
put wires on new element
put the screws back in
turn the power back on
remove screws holding bake element in
pulls wires off old element
put wires on new element
put the screws back in
turn the power back on
Was this helpful?
Thank you for voting!
While baking cookies I looked in the oven only to find the bake element was glowing white on the curve of the element, then a second spot started to burn. The element was fried.
1 person
found this instruction helpful.
-
Angela from Ruidoso, NM
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
The repair took less time than finding the model number. After unplugging the range and allowing it to cool I disconnected the element (2 screws), went online and found Part Select ordered the element and saved $16.00 dollars over the least expensive local shop, I was amazed at how fast the element arrived, I believe it was 4 days from or
... Read more
der to my door. I went to my local hardware store for some new connectors for the wire, put them on and plugged in the element fastened down the two screws and went back to baking cookies. The element was well and safely packed and came in perfect condition. It works like a charm. Thank You
Read less
Was this helpful?
Thank you for voting!
bake element had stopped working
1 person
found this instruction helpful.
-
lynne from pelham, NH
- Easy
- Less than 15 mins
-
Pliers, Socket set
My husband had recently moved out of our house so I was very nervous about trying this repair myself but it was actually very easy!!I ordered the part on Monday, it arrived on Wednesday and Wednesday night I was baking dinner in the oven!!
Was this helpful?
Thank you for voting!
oven not heating up
1 person
found this instruction helpful.
-
raymond from irvine, CA
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
ordered new heating element, arrived promptly as expected, compared new heating element to old one and it matched in size only diameter a little different, removed two sheet metal screws holding element in place and pulled out element to expose conductors and removed them with screwdriver. Installed conductors on new heating element slid
... Read more
into holes and installed screws, turned power back on(first step is to turn off power) turned on oven to preheat and she worked like a new one. Thank you PartSelect. Saved me a bundle,
Read less
Was this helpful?
Thank you for voting!