FEC30C4AQC Frigidaire Cooktop - Parts

This chrome drip bowl is designed for use with electric cooktops and ranges. This drip bowl is sold individually. At the widest point this part has a diameter of approximately 10 inches. It sits beneath the surface burner element. It catches any drips or spills coming from the cookware on your burner. Because the cooktop is a high-traffic...Read more area of the kitchen, these bowls often get damaged, or get so dirty they can no longer be adequately cleaned. When replacing this part you need to remove the burner element. While you have it out we recommend inspecting the terminals and the element for any corrosion, arcing, or discoloration. Any of those things could be a sign of a bigger problem, and it indicates that the element and terminal block should be replaced.

The drip bowl catches grease and spills that come from cooking on your stove top. They are located under the heating elements. Drip bowls are often neglected and can become rusted and cracked. If your drip bowl is damaged, it could allow grease, food, or other spills to drip inside your range. This could become a fire hazard. This 6 inch ...Read morechrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. To replace the drip bowl, remove the element, replace the current drip bowl, and reattach the element. This part is sold individually.

This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzin...Read moreg noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.

This surface element infinite switch is designed to control the temperature of a large burner on electric ranges, cooktops, and wall ovens. It regulates the power supply to the heating element, allowing precise adjustment of heat levels for cooking. Built for reliability, this switch is intended for an 8-inch surface element and ensures c...Read moreonsistent performance. Installation typically involves disconnecting power, accessing the control panel, and securing the new switch in place. Replacing a faulty switch restores accurate temperature control and safe operation.

Bring steady heat back to a large cooking area with this 8-inch electric coil element. Rated at 2,100 watts, it turns electrical power into heat for boiling, frying, and other stovetop tasks. The burner has five coil turns, looped terminals, and a chrome center cap. Replacement may be needed when the old element does not heat, works only ...Read moreat times, or has visible cracks, blisters, or burned areas. Check the burner socket for damage before installation. Unplug the range or switch off its circuit breaker, let the cooking surface cool, and wear work gloves before removing the old element.

This infinite control switch regulates power to a surface burner, allowing smooth and adjustable heat control. Reliable switching improves cooking accuracy and safety. Replacing a faulty switch helps restore consistent burner operation.