My Orders
FE1244PS LG Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven would initially start to heat up but would not hold its temp
6 of 8 people
found this instruction helpful.
-
Leonard from Plano, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I searched online and found someone that seemed to have the exact problem. That person had replaced the lower burner and the same PCB board I replaced. I was able to test the lower burner without removing it and it tested OK. The PCB board in the article I had checked was burned and obviously bad but mine was not. I took a chance and
... Read more
ordered just the PCB board. I replaced this board and the oven now works perfectly. I seems this board was not turning on the bottom burner but the system thought it was working fine.
Read less
Was this helpful?
Thank you for voting!
Thermostat needed to be replaced
8 of 27 people
found this instruction helpful.
-
Denise from NORTH BEACH, MD
- Really Easy
- Less than 15 mins
-
Screw drivers
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping).
Unfortunately I probably won't order ... Read more from PartSelect again.
Unfortunately I probably won't order ... Read more from PartSelect again.
Read less
Was this helpful?
Thank you for voting!
Broken front leveler
8 of 36 people
found this instruction helpful.
-
K R from BOISE, ID
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
This is a very simple repair of remove and replace. You do have to lay down the range to make it easy.
Was this helpful?
Thank you for voting!