- Home
- FCFS201LFB0
- Instructions
FCFS201LFB0 Frigidaire Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
would not defrost
-
Nick from Silver Spring, MD
- Really Easy
- 30 - 60 mins
-
Screw drivers
Replace thermostat and show and tell made it easy.
Was this helpful?
Thank you for voting!
Would not freeze or defrost
-
RONALD from Sevierville, TN
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Unplug freezer let stand all night to defrost. Remove the tray cover which is located on the upper back area inside the freezer.( 3 twist fittings remove it ). Remove the upper stainless steel panel which is secured with 6 screws. This will drop down exposing the condenser. Note all the wires and fan will stay attached to the stainless
... Read more
steel panel, this panel will drop down no need to unplug anything. On the left upper side next to the condenser you will see the thermostat. Two color coded wires. Remove the thermostat and install the new one at the same location.
Read less
Was this helpful?
Thank you for voting!
Freezer was no longer keeping items frozen,
-
Philippa from New York, NY
- Easy
- 30 - 60 mins
-
Screw drivers
I followed the You-Tube instructions, removed the ice from the compressor and replaced the thermostat with the part I received from Part Select. What I took out was a part that was very much inferior to the replacement part. The repair saved me a lot of money for a new freezer and it was not difficult to do following the video. Now the f
... Read more
reezer runs better and quieter than ever. Thank you Parts Select.
Read less
Was this helpful?
Thank you for voting!
Freezer was warm
-
Charles from Macomb, MI
- Really Easy
- 30 - 60 mins
-
Screw drivers
I first noticed my ice cream getting soft. Then 2 days later the alarm went. I emptied the freezer, opened the panels and saw no frost. I saw that 99% of issues were resolved with a defrost timer and thermostat so I ordered those. I have to say the parts came quickly and they went in very easy. My freezer seems to be in the 1% categor
... Read more
y though. It's still not cooling even though I can measure the temperature at the front of the evaporator coil is cold but by the end of the coil it's almost room temperature. I think a repairman is called for.
Read less
Was this helpful?
Thank you for voting!
while cleaning the condenserI accidentally hit the fan blade and broke it
-
james from vandergrift, PA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Had my 3 year old remove the 4 screws to holds the carboard in place. Pryde the old fan blade off with a screwdriver. slid the new fan blade on to the shaft then my 3 year old put the screws back in.
Was this helpful?
Thank you for voting!
Freezer would not keep running and the temperature was too warm.
-
Edmond from Carroll, NH
- Really Easy
- 15 - 30 mins
-
Screw drivers
Followed the sites instructions. Empty the bottom part of the freezer. Remove the screws. Move the panel out of the way. Easily remove the old part and replace with the new. Put the panel and screws back in place. The freezer works.
Was this helpful?
Thank you for voting!
broken light switch
-
John W from Gloucester, MA
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Removed 2 screws holding front bottom vent grille. . Through opening behind grille found broken part of switch hanging on wires. Removed wires from switch and fed them out through hole for mounting switch, connected wire and pushed into place. The greatest difficulty encountered was my 82 year old knees.
Was this helpful?
Thank you for voting!
Rattling Noise from behind frig
-
Michael from Rockford, MI
- Easy
- 15 - 30 mins
-
Socket set
Initially, I traced the noise down to the evaporator motor area. I thought it was the fan blade so I ordered and changed it. Noise level better but still not good. Then I ivestigated problem area again. Removed the motor,discoverd that the motor shaft was loose /drifting which caused the "hummm" and uneven fan blade rotation. Orderd and
... Read more
installed new motor and all is good.
Read less
Was this helpful?
Thank you for voting!
Fan would stop or turn slowly. outside of refridg hot
-
Rusty from Howell, NJ
- Easy
- 15 - 30 mins
-
Nutdriver, Socket set
took off cardboard removed two screws holding fan housing. Removed new fan and housing from box and mounted new fan to new housing (two screws). Installed new fan and housing. reinstalled cardboard and plunged in power cord. Perfect fit.
Was this helpful?
Thank you for voting!
When I was ready to instal fan motor, I noticed that there was no thread where I was supposed to screw in the bolts
-
hector from los fresnos, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
When i found out there was no thread in brace where bolts were supposed to screw in, I panicked. I thought I would have to send part back or go to a machine shop to make a thread. I called a friend for help and he told me the bolts would make the thread if I just screwed them in. Sure enough, the bolts made the thread and then I just proc
... Read more
eeded to instal motor and put refrigerator back together. It was simple.
Read less
Was this helpful?
Thank you for voting!
Freezer freezes up; lower unit to warm
-
David from Front Royal, VA
- Easy
- 15 - 30 mins
-
Nutdriver
Replaced freezer defrost thermostat. Unit worked perfectly.
Was this helpful?
Thank you for voting!
Broken blade on fan.
-
Deborah from Ridge Spring, SC
- Really Easy
- Less than 15 mins
-
Pliers
Used needle nose pleirs to slide the old fan off.Then slide the new fan on the spindle.The video really made this easy!
Was this helpful?
Thank you for voting!
Broken fan blade ,I forgot to unpluge before cleaning
-
Melissa from Anderson, IN
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
I did it just like the video it was that easy! love this web site amazing!
Was this helpful?
Thank you for voting!
Fan Blade had broke off
-
Linda from Cocoa, FL
- Really Easy
- Less than 15 mins
-
Nutdriver
This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.
Was this helpful?
Thank you for voting!
Blade was broken off of fan.
-
Wayne from Elkhart, IN
- Really Easy
- Less than 15 mins
-
Nutdriver
I removed the back panel ,cardboard-three screws,pushed the old fan blade off the motor and pushed the new fan on.Extremely easy.
Was this helpful?
Thank you for voting!