EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

F22CWF2 Frigidaire Freezer - Instructions

All Instructions for the F22CWF2
61 - 75 of 107

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer was building up ice. Running constantly.
0 of 3 people found this instruction helpful.
  • eugene from norwalk, CT
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Parts Select is an excellent source for help and parts identification. I highly recomend them.
My first option was to replace the defrost timer.
After still getting ice and frost buildup in freezer I decided to replace the defrost thermostat.
Remove all shelves. Losen icemaker if applicable. Remove light cover and bulb. R emove all screws securing rear vertical cover. Carefully move back panel, disconnect icemaker and bulb assembly. carefully remove styrofoam cover at upper left and remove defrost thermostat. I tested the thermostat and found it was defective. It would not close circuit after being placed in a working freezer. Reverse procedure to replace thermostat.
This solved the problem
Was this helpful?
Thank you for voting!
broke fan blade while trying to remove dust.
  • Jack from Kiefer, OK
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Socket set
Removed old fan motor and installed new one.Not much room for big hands back there.Flexible extensions valuable on this job.
Was this helpful?
Thank you for voting!
condenser fan stop working
  • George from Gilroy, CA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
Replaced fan. I ordered the fan and received it the following.(-:
Was this helpful?
Thank you for voting!
Rattling Noise from behind frig
  • Michael from Rockford, MI
  • Easy
  • 15 - 30 mins
  • Socket set
Initially, I traced the noise down to the evaporator motor area. I thought it was the fan blade so I ordered and changed it. Noise level better but still not good. Then I ivestigated problem area again. Removed the motor,discoverd that the motor shaft was loose /drifting which caused the "hummm" and uneven fan blade rotation. Orderd and installed new motor and all is good.
Was this helpful?
Thank you for voting!
Fan would stop or turn slowly. outside of refridg hot
  • Rusty from Howell, NJ
  • Easy
  • 15 - 30 mins
  • Nutdriver, Socket set
took off cardboard removed two screws holding fan housing. Removed new fan and housing from box and mounted new fan to new housing (two screws). Installed new fan and housing. reinstalled cardboard and plunged in power cord. Perfect fit.
Was this helpful?
Thank you for voting!
When I was ready to instal fan motor, I noticed that there was no thread where I was supposed to screw in the bolts
  • hector from los fresnos, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench set
When i found out there was no thread in brace where bolts were supposed to screw in, I panicked. I thought I would have to send part back or go to a machine shop to make a thread. I called a friend for help and he told me the bolts would make the thread if I just screwed them in. Sure enough, the bolts made the thread and then I just proc eeded to instal motor and put refrigerator back together. It was simple.
Was this helpful?
Thank you for voting!
Freezer freezes up; lower unit to warm
  • David from Front Royal, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver
Replaced freezer defrost thermostat. Unit worked perfectly.
Was this helpful?
Thank you for voting!
Freezer would not keep running and the temperature was too warm.
  • Edmond from Carroll, NH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Followed the sites instructions. Empty the bottom part of the freezer. Remove the screws. Move the panel out of the way. Easily remove the old part and replace with the new. Put the panel and screws back in place. The freezer works.
Was this helpful?
Thank you for voting!
while cleaning the condenserI accidentally hit the fan blade and broke it
  • james from vandergrift, PA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Had my 3 year old remove the 4 screws to holds the carboard in place. Pryde the old fan blade off with a screwdriver. slid the new fan blade on to the shaft then my 3 year old put the screws back in.
Was this helpful?
Thank you for voting!
Broken blade on fan.
  • Deborah from Ridge Spring, SC
  • Really Easy
  • Less than 15 mins
  • Pliers
Used needle nose pleirs to slide the old fan off.Then slide the new fan on the spindle.The video really made this easy!
Was this helpful?
Thank you for voting!
Broken fan blade ,I forgot to unpluge before cleaning
  • Melissa from Anderson, IN
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
I did it just like the video it was that easy! love this web site amazing!
Was this helpful?
Thank you for voting!
Fan Blade had broke off
  • Linda from Cocoa, FL
  • Really Easy
  • Less than 15 mins
  • Nutdriver
This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.
Was this helpful?
Thank you for voting!
Side rail for sliding shelf would not stay tight
  • Scott J from Westminster, CO
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
The sliding shelf side rail is held by three philips head screws that tighten into nut inserts. No amount of tightening would keep two of the three screws tight. I found that the nut inserts which are plastic and insert into the side of the freezer would pull loose, probably from years of overloading the sliding shelf basket. Ordered t wo nut inserts from PartSelect. 1. Remove three screws to remove shelf slide side rail. 2. Remove nut inserts to be replaced with needle nose pliers or reinsert screw a couple of turns and pull nut insert out with pliers. 3. Insert new nut inserts, position side rail, and tighten screws. Replace sliding shelf/basket.
Was this helpful?
Thank you for voting!
Blade was broken off of fan.
  • Wayne from Elkhart, IN
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I removed the back panel ,cardboard-three screws,pushed the old fan blade off the motor and pushed the new fan on.Extremely easy.
Was this helpful?
Thank you for voting!
Coils not Defrosting and stopped freezing
  • Joseph from Yulee, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Upluged power pulled freezer out from wall removed the two screws that holds the defrost timer unpluged defrost timer pluged new timer in mounted new timer back with the two screws pluged freezer back in and job was complete. Freezer working fine.
Was this helpful?
Thank you for voting!
All Instructions for the F22CWF2
61 - 75 of 107