F22CWF0 Frigidaire Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
while cleaning the condenserI accidentally hit the fan blade and broke it
-
james from vandergrift, PA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Had my 3 year old remove the 4 screws to holds the carboard in place. Pryde the old fan blade off with a screwdriver. slid the new fan blade on to the shaft then my 3 year old put the screws back in.
Was this helpful?
Thank you for voting!
Freezer would not keep running and the temperature was too warm.
-
Edmond from Carroll, NH
- Really Easy
- 15 - 30 mins
-
Screw drivers
Followed the sites instructions. Empty the bottom part of the freezer. Remove the screws. Move the panel out of the way. Easily remove the old part and replace with the new. Put the panel and screws back in place. The freezer works.
Was this helpful?
Thank you for voting!
broken light switch
-
John W from Gloucester, MA
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Removed 2 screws holding front bottom vent grille. . Through opening behind grille found broken part of switch hanging on wires. Removed wires from switch and fed them out through hole for mounting switch, connected wire and pushed into place. The greatest difficulty encountered was my 82 year old knees.
Was this helpful?
Thank you for voting!
Rattling Noise from behind frig
-
Michael from Rockford, MI
- Easy
- 15 - 30 mins
-
Socket set
Initially, I traced the noise down to the evaporator motor area. I thought it was the fan blade so I ordered and changed it. Noise level better but still not good. Then I ivestigated problem area again. Removed the motor,discoverd that the motor shaft was loose /drifting which caused the "hummm" and uneven fan blade rotation. Orderd and
... Read more
installed new motor and all is good.
Read less
Was this helpful?
Thank you for voting!
Fan would stop or turn slowly. outside of refridg hot
-
Rusty from Howell, NJ
- Easy
- 15 - 30 mins
-
Nutdriver, Socket set
took off cardboard removed two screws holding fan housing. Removed new fan and housing from box and mounted new fan to new housing (two screws). Installed new fan and housing. reinstalled cardboard and plunged in power cord. Perfect fit.
Was this helpful?
Thank you for voting!
When I was ready to instal fan motor, I noticed that there was no thread where I was supposed to screw in the bolts
-
hector from los fresnos, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
When i found out there was no thread in brace where bolts were supposed to screw in, I panicked. I thought I would have to send part back or go to a machine shop to make a thread. I called a friend for help and he told me the bolts would make the thread if I just screwed them in. Sure enough, the bolts made the thread and then I just proc
... Read more
eeded to instal motor and put refrigerator back together. It was simple.
Read less
Was this helpful?
Thank you for voting!
Freezer freezes up; lower unit to warm
-
David from Front Royal, VA
- Easy
- 15 - 30 mins
-
Nutdriver
Replaced freezer defrost thermostat. Unit worked perfectly.
Was this helpful?
Thank you for voting!
Broken blade on fan.
-
Deborah from Ridge Spring, SC
- Really Easy
- Less than 15 mins
-
Pliers
Used needle nose pleirs to slide the old fan off.Then slide the new fan on the spindle.The video really made this easy!
Was this helpful?
Thank you for voting!
Broken fan blade ,I forgot to unpluge before cleaning
-
Melissa from Anderson, IN
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
I did it just like the video it was that easy! love this web site amazing!
Was this helpful?
Thank you for voting!
Fan Blade had broke off
-
Linda from Cocoa, FL
- Really Easy
- Less than 15 mins
-
Nutdriver
This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.
Was this helpful?
Thank you for voting!
Blade was broken off of fan.
-
Wayne from Elkhart, IN
- Really Easy
- Less than 15 mins
-
Nutdriver
I removed the back panel ,cardboard-three screws,pushed the old fan blade off the motor and pushed the new fan on.Extremely easy.
Was this helpful?
Thank you for voting!
Side rail for sliding shelf would not stay tight
-
Scott J from Westminster, CO
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
The sliding shelf side rail is held by three philips head screws that tighten into nut inserts. No amount of tightening would keep two of the three screws tight. I found that the nut inserts which are plastic and insert into the side of the freezer would pull loose, probably from years of overloading the sliding shelf basket. Ordered t
... Read more
wo nut inserts from PartSelect. 1. Remove three screws to remove shelf slide side rail. 2. Remove nut inserts to be replaced with needle nose pliers or reinsert screw a couple of turns and pull nut insert out with pliers. 3. Insert new nut inserts, position side rail, and tighten screws. Replace sliding shelf/basket.
Read less
Was this helpful?
Thank you for voting!
Freezer would constantly run. Even when it was super cold inside.
-
David from San Marcos, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
I ordered a new thermostat and installed it in less than 15 minutes. Looks like the problem is fixed. Now ,the freezer cycles on and off correctly. The part was ordered on a Monday and I got it the next day. I am very satisfied.
Was this helpful?
Thank you for voting!
door switch broke
-
Ricardo from VICTORVILLE, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed bottom cover , just two screws , slid old part through install hole and removed wires from old switch and installed on new switch. Installed new switch in same hole and pushed gently until it locked in place. Reinstalled bottom cover and done.
Was this helpful?
Thank you for voting!
coils would freeze over not allowing air to circulate throughout freezer
-
robert from royal oaks, CA
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
replace thermostat and timer after defrosting and cleaning out freezer. I took less than 10 minutes and now freezer has a defrost cycle that eliminates frost buildup on the coils.
Other Parts Used:
Was this helpful?
Thank you for voting!