EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

F22CW2 Frigidaire Freezer - Instructions

All Instructions for the F22CW2
16 - 28 of 28

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Adjust the door hinge for new gasket.
  • Kinnett from Gaffney, SC
  • Easy
  • 1- 2 hours
  • Screw drivers
Loosened the screws, removed the old gasket. Cleaned contact area and installed the new gasket. Adjusted the door hinge and used a hair dryer to let the new gasket relax and seal.
Was this helpful?
Thank you for voting!
won't start repaced the run capacitor didn't solve the problem so I ordered a defrost timer
  • Curtis from Winlock, WA
  • Really Easy
  • 15 - 30 mins
I watched the videos (they really help) and followed the steps. Everything went smooth with no surprises
Was this helpful?
Thank you for voting!
not cold enough
  • Gary from Hudson, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
per the video..easy installation....unfortunately the temperature did not improve. We still have a refrigerator temp in the upper freezer.....and a "cooler" in the refrigerator section
Was this helpful?
Thank you for voting!
Frige and freezer not cooling
  • FRANK from BRADENTON, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I should have ordered start kit instead of start capacitor. The start cap astir did not fix problem so I ordered kit. Compasator comes as part of kit. Followed enclosed instructions. Cut existing wires and reconnected new wiring. Simple as that. It's a plug in item. Now worried it may be working to good. Freezer down to 10 deg. Watching to see if compressor is running to long. Seems ok lol. Wife hates me now. She wanted new frige.
Was this helpful?
Thank you for voting!
broken light switch
  • John W from Gloucester, MA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Removed 2 screws holding front bottom vent grille. . Through opening behind grille found broken part of switch hanging on wires. Removed wires from switch and fed them out through hole for mounting switch, connected wire and pushed into place. The greatest difficulty encountered was my 82 year old knees.
Was this helpful?
Thank you for voting!
door switch broke
  • Ricardo from VICTORVILLE, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed bottom cover , just two screws , slid old part through install hole and removed wires from old switch and installed on new switch. Installed new switch in same hole and pushed gently until it locked in place. Reinstalled bottom cover and done.
Was this helpful?
Thank you for voting!
freezer would not freeze longer than one day. after ten years without problem
  • ronald from deering, NH
  • Really Easy
  • Less than 15 mins
pulled out freezer, went to floor,reached in next to compressor pulled off clip just like on the video.Pulled off old capacitator took off wire leads.Installed new one. Freezer runs great.Loaded it up with beef pork and venison. No problems.
Was this helpful?
Thank you for voting!
the compressor capacitor overheated
  • Bart from goldsboro, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
Was this helpful?
Thank you for voting!
compressor not running
  • wilson from indialantic, FL
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Wrench (Adjustable)
thanks to all of the people who had the same problems I was able to make a quick fix on my fridge. I pulled the back cover off and found the compressor not kicking on so I replaced the start cap. and im back in bussiness.
Was this helpful?
Thank you for voting!
refer quit cooling and so did freezer
  • jerry from petaluma, CA
  • Really Easy
  • Less than 15 mins
I replaced the defrost timer,defrost thermostat,and run cap.as it turned out the compressor went bad. I dont know the model because but the time I got this review I replaced the refer with a knew one . two weeks living out of coolers was so much fun !!!!!!!!
Was this helpful?
Thank you for voting!
All Instructions for the F22CW2
16 - 28 of 28