- Home
- F14A2CDYP7
- Instructions
F14A2CDYP7 LG Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bought used, realized did not have a detergent dispenser.
2 of 4 people
found this instruction helpful.
-
Lynly from Montrose, CO
- Really Easy
- Less than 15 mins
Found this part online. I just sets inside, did not click in like the bleach and fabric softener inserts. Think is ok, seems to work
Was this helpful?
Thank you for voting!
Water leak from cold water inlet valve
1 person
found this instruction helpful.
-
John from COLLEGE STA, TX
- Very Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Looked at videos on line at Parts Select. Very easy instructions to watch and follow. After unplugging the washer all I had to do was turn off the cold water valve, remove the supply line, two screws to get the lid off, then two screws to remove the valve and disconnected the electric connector tabs. Took pliers to back the three hose cl
... Read more
amps off. The best tip was replacing each hose back on the valve one at a time to prevent mix ups. I did everything in reverse after installation. I ran one short cycle to test the leak. Works perfectly!
A tip I saw on You Tube - I have vinyl flooring in my wash room and a repair guy said to spray a light shot of WD 40 under the feet. It doesn’t take much. Man, my washer slid like it was on wheels! I wiped away any excess spray and let it dry under the feet. I’m not sure how this works on other types of floors.
A tip I saw on You Tube - I have vinyl flooring in my wash room and a repair guy said to spray a light shot of WD 40 under the feet. It doesn’t take much. Man, my washer slid like it was on wheels! I wiped away any excess spray and let it dry under the feet. I’m not sure how this works on other types of floors.
Read less
Was this helpful?
Thank you for voting!
Our washer was leaking from the washer hose. Once taken off I could see it had a small tear in it. All it took was a screwdriver and a couple minutes and we were up and running. I love PartSelect.com for always having the parts I need and getting them to me in a timely manner!
1 person
found this instruction helpful.
-
Tiffany from PUYALLUP, WA
- Very Easy
- 15 - 30 mins
-
Screw drivers
Took off the old hose with a screwdriver and put the new one on. As simple as that. You don’t need a repair man to get this done, you can do it yourself and save money too.
Other Parts Used:
Was this helpful?
Thank you for voting!
Hot water valve was leaking
1 person
found this instruction helpful.
-
Rick from KERRVILLE, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
After I watched the repair video for the part, it was a snap. It went exactly as the video described the steps. Hardest part was moving the washer to get behind it.
Was this helpful?
Thank you for voting!
water leak
1 person
found this instruction helpful.
-
Jaime from ALBUQUERQUE, NM
- Very Easy
- 15 - 30 mins
-
Pliers
As per instructions.
Was this helpful?
Thank you for voting!
old solenoids were leaking water.
1 person
found this instruction helpful.
-
PETER from BOZEMAN, MT
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Followed video provided by this site. Very install, less than 30 minutes.
Other Parts Used:
Was this helpful?
Thank you for voting!
Broke cold water inlet while moving
1 person
found this instruction helpful.
-
Daniel from COLUMBUS, OH
- Really Easy
- 15 - 30 mins
-
Nutdriver
Replaced cold water inlet. Removed 4 water lines and 5 wires put new part in and reinstalled lines and wires
Was this helpful?
Thank you for voting!
Washer was not draining
1 person
found this instruction helpful.
-
ALEX from TULARE, CA
- Very Easy
- 15 - 30 mins
-
Screw drivers, Wrench (Adjustable)
It was giving me a code got on YouTube it gave the code after that bought a new pump and fix done
Was this helpful?
Thank you for voting!
Washer would not fill with water and a (I E) Code displayed on the screen.
1 person
found this instruction helpful.
-
Manuel from MESILLA PARK, NM
- Easy
- 15 - 30 mins
-
Screw drivers
I looked at the video that is on the partselect.com website. The person that I talked to from the website was very knowledgeable about the problem with my washer and he gave me the part number to type in the search box of the website. When I typed the part number in the search box the part showed up and the installation video showed up al
... Read more
so. The video is an excellent video. It shows exactly how to do it. I also downloaded the operator manual from the website to look up what the error code meant.
Read less
Was this helpful?
Thank you for voting!
Leaky inlet valve assembly #P221ER1003A
1 person
found this instruction helpful.
-
Carole from PHOENIX, AZ
- Very Easy
- 15 - 30 mins
-
Screw drivers
I set my iPad on the exposed washing machine drum, was exposed after removing top as explained in video, and put on the ‘ how to do video it’. It was so easy for this 78-year-old brain, that I am very pleased with myself. Also would like to thank whoever I talked to, Chris, when I ordered this part from this company, Chris was very helpfu
... Read more
l and took time with me. So this ‘do it yourself person’, and I’m really not a do it yourself person, WILL certainly be looking into other do it yourself fixers. Thank you again.
Read less
Was this helpful?
Thank you for voting!
Cold water selenoid leaking
1 person
found this instruction helpful.
-
Ray from Devils Lake, ND
- Very Easy
- 15 - 30 mins
-
Nutdriver, Pliers
Removed and replaced unit after turning off the cold water valve. Turned water back on and it worked as it should. I also have to mention the very rapid shipping! Thank you!
Was this helpful?
Thank you for voting!
Gave LE code
1 of 2 people
found this instruction helpful.
-
Michael from SAINT LOUIS, MO
- Really Easy
- 15 - 30 mins
-
Socket set
Former LG repair looked under washer while it was engaging & noticed motor was not spinning. LG took forever I ordered the part from you guys. It looked different from original. Figured out to take extra port for front loader. I have top loader. Installed washer works great!!
Was this helpful?
Thank you for voting!
Pump stopped working
1 of 2 people
found this instruction helpful.
-
Martin from Pie Town, NM
- Easy
- 1- 2 hours
-
Pliers, Screw drivers, Socket set
Followed the video instructions provided.
Was this helpful?
Thank you for voting!
Error code "EO", Drain Pump not working
1 of 2 people
found this instruction helpful.
-
Stephen from DEMING, NM
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
I followed the video on the PartSelect web site for this repair and it went just fine. I also replaced the drain hose while I had everything apart. Thank you PartSelect, same day shipping. Arrived within 3 day's and your video was spot on.
Was this helpful?
Thank you for voting!
WASHER WOULD NOT EMPTY WATER DURING RINSE
1 of 3 people
found this instruction helpful.
-
michael from GRANTS PASS, OR
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
I BROUGHT UP THE YOUTUBE REPAIR VIDEO AND FOLLOWED IT STEP BY STEP AND WORKED OUT GREAT THANKS
Other Parts Used:
Was this helpful?
Thank you for voting!