My Orders
F1273ND (ABWPBAL) LG Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
washer tub shakes violently during spin cycle.
5 of 5 people
found this instruction helpful.
-
charlie from LAUDERHILL, FL
- Easy
- Less than 15 mins
-
Pliers
turn washer on it's side. dampers are visible from underneath. use needle nose pliers to "pinch" end of retaining pin and pull pin out. it will take some force to remove. i would recommend replacing all 3 as i had one that had a mounting tab broken off. i then realized the other dampers were bad. there should be resistance in the up and d
... Read more
own motion. if not replace.
Read less
Was this helpful?
Thank you for voting!
While replacing the tub support (spider) I chose to replace the gasket.
2 of 2 people
found this instruction helpful.
-
Robert from HYDE PARK, VT
- A Bit Difficult
- More than 2 hours
-
Pliers, Screw drivers, Socket set
The spider repair and the tub seal replacement are fairly complicated, and time-consuming, but manageable with patience. I viewed the youtube video that showed the process, which gave me confidence. It entails disassembling the machine and removing quite a few major pieces. Take care with the numerous screws and bolts, and be patient and
... Read more
you can be successful. Plan a lot of time for all the steps.
The hardest part is putting the door bellows back on.
The hardest part is putting the door bellows back on.
Read less
Was this helpful?
Thank you for voting!
h2o filled w/o stopping
-
sherman from BROKEN ARROW, OK
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
removed top, removed 2 screws, replace part. did not fix problem, the real problem was the water inlet valve, works great, easy fix. thanks
Was this helpful?
Thank you for voting!