EWDW6505GW0B Electrolux Dishwasher - Parts

This is a bracket, but it may also be known as a dishrack row clip, or simply a tine clip, and it is used in conjunction with your dishwasher. The purpose of this part is to fasten to the rack and the tine row. This will give the tine the stability it needs to hold your glasses and bowls by firmly attaching to the rack. You will not need ...Read moreany tools to make this repair. This piece is sold individually, measures to be about 2 inches by 1 inch, and is gray in color.

Upper Rack Assembly - T3 PRO. This is the complete upper rack and the wash arm.

This part releases the detergent and rinse aid into the dishwasher. NOTE: Color may vary but the part will function the same as the original.

The roller assembly is attached to the upper dishrack of your dishwasher. This is what allows you to easily move your dishrack in and out. The wheel may become damaged over time and will not allow you to easily slide the rack back and forth. To perform this repair, you will need to first open the dishwasher drawer. Remove the end caps of ...Read morethe upper rack and the rack should easily slide out. There are 4 wheels on either side of the dishwasher (8 in total). Check to make sure they are all in good shape in case you need to replace more than one at a time. Simply use your screwdriver to remove and re-install the new part.

This is an OEM dishrack roller assembly that fits on the lower rear of your dishwasher rack. This part is sold individually. Check the opposite lower dishrack assembly before ordering in case it needs to be replaced as well. The rollers attach to your lower dishrack and allow the rack to smoothly roll forward and backward when the dishwas...Read moreher door is open. Without the rollers, it would be difficult to access the rack to safely fill and empty the appliance with dishes. The front lower roller assembly will have a different part number than this part.

This gasket is a seal for your dishwasher and prevents leaking from occurring. The gasket can become worn down over time and you might notice some discoloration. This indicates a replacement is necessary. The gasket is found in between the opening of the dishwasher tub and the outside edge of the door. This seal is made of rubber and is b...Read morelack in color. This repair requires no tools. To ensure that it is properly sealed into place, shut the dishwasher door, and leave it shut for a few hours.

Spray arms rotate and spray water to clean the dishes inside the dishwasher tub. This part is located beneath the upper rack. The spray arm is meant to spray water and detergent forcefully over the dishes. If your dishes are not being cleaned properly, you should check if there is an issue with the spray arm. If the spray arm is made of p...Read morelastic, it can become warped or cracked. If it is a metal spray arm, it can pull open at the seams or get bent. Make sure the spray arms can move evenly and freely on their bearing rings and mounting brackets. Remove your spray arms and check to ensure they are straight and undamaged. This part includes the manifold. NOTE: Clogged holes are a hint to check if there is a problem with the filter system that resulted in debris coming into the arms.

This clip is designed for use in your dishwasher. If you notice that your original clip is damaged, or the dishwasher is not cleaning dishes properly, you may need to replace it. The clip snaps on to the top dish rack. This product is gray in color and is made entirely of plastic. The clip also comes in black, however both the gray and bl...Read moreack models function in the same way. This product is approximately 6 inches in length, by 4 inches in width. This clip is an OEM part sourced directly from the manufacturer. This part is sold individually.

Sold individually.