EVP399 Caloric Microwave Oven Combo - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Purchased home but stove had no broiler pan.
16 of 33 people
found this instruction helpful.
-
Raymond from BLOOMINGTON, MN
- Very Easy
- Less than 15 mins
Purchased 2 piece broiler pan from this site
Was this helpful?
Thank you for voting!
light bulb in water ice freezer door went bad
8 of 14 people
found this instruction helpful.
-
Carl from RIVERSIDE, CA
- Very Difficult
- More than 2 hours
-
Screw drivers
I didn't. Don't know how to get to light bulb to change it for this specific model
Was this helpful?
Thank you for voting!
Loose terminal caused block to overheat and break
6 of 10 people
found this instruction helpful.
-
Dana from Black Mountain, NC
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well.
Was this helpful?
Thank you for voting!
Son accidentally melted alot of plastic in oven.
5 of 8 people
found this instruction helpful.
-
Virginia from Holts Summit, MO
- Really Easy
- Less than 15 mins
I took out ruined racks. Cleaned the oven, getting rid of all the melted plastic. Once oven was sparkling clean, I slid in the new racks I bought from here. (The easiest part).
* * * *
I'm very thankful to have found this site. My oven has been "out of order" for over 3 years. It's so nice to be able to use it again! =)
* * * *
I'm very thankful to have found this site. My oven has been "out of order" for over 3 years. It's so nice to be able to use it again! =)
Was this helpful?
Thank you for voting!
My son turned on the oven, not realizing the salad spinner was inside.
3 of 4 people
found this instruction helpful.
-
Donna from Orinda, CA
- Really Easy
- Less than 15 mins
I called the local appliance parts store and they said it would cost $60-80 and take a week to order. I paid $16 and received my rack in 2 days!
Was this helpful?
Thank you for voting!
just moved.range oven had only 1 wire oven rack
3 of 4 people
found this instruction helpful.
-
Mary Jane from Union City, TN
- Really Easy
- Less than 15 mins
I just ordered a new wire oven rack from you. When it came all I had to do was to remove it from the carton it came in and place it in the oven. It fit perfectly. Thanks
Was this helpful?
Thank you for voting!
Replacing the bulb in the freezer side
5 of 11 people
found this instruction helpful.
-
Yafa (and David) from Bothell, WA
- Easy
- Less than 15 mins
-
Nutdriver
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.
Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.
Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.
Was this helpful?
Thank you for voting!
Broken glass tray
3 of 5 people
found this instruction helpful.
-
Jerry from Roseville, CA
- Really Easy
- Less than 15 mins
There was nothing to actually, I just put in the bottom of the oven and cooked my sausage about 40 seconds later there is a loud POP and that's it. End of repair, end of breakfast, end of oven. I am returning the glass tray to you and asking for a refund. It was less expensive to go buy a new oven then to have that 30 year old repaired
... Read more
!
I do thank you for you prompt service and shipping.
We can't say we didn't try.
I do thank you for you prompt service and shipping.
We can't say we didn't try.
Read less
Was this helpful?
Thank you for voting!
Missing oven rack
2 of 3 people
found this instruction helpful.
-
Denise from Pittsburgh, PA
- Really Easy
- Less than 15 mins
Although this was not a repair I wanted to let you know your service was outstanding and the price quite reasonable. I am very happy to finally have a much needed second rack in my oven that was not there when I purchased my home. Thank You
Was this helpful?
Thank you for voting!
Range oven door switch need replaced
1 person
found this instruction helpful.
-
Ruth from Gastonia, NC
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Screw drivers
I raised the top of my Whirlpool Continuous Cleaning Canning Oven, then had to unscrew 3 screws and a lock nut, then raise top about 4 inches, so I could put my hand inside to unplug the wires to the switch, and push it through the hole in front, of oven. Then put the new switch through hole and plug in new switch. Then screw down top;
... Read more
and close lid. Part #866294
Read less
Was this helpful?
Thank you for voting!
wire came loose and shorted out
1 of 2 people
found this instruction helpful.
-
Elizabeth from HOUSTON, TX
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Ordering the part online was easy. It arrived in a timely manner. I found a terrific video online showing how to install the terminal. It was so easy. Thank you for the great instructional video.
Was this helpful?
Thank you for voting!
I snapped a bolt on the main power terminal block when connecting the pigtail.
3 of 8 people
found this instruction helpful.
-
Frank from Palm Coast, FL
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver.
... Read more
Connect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.
Read less
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 people
found this instruction helpful.
-
RAYMOND from JACKSONVILLE, FL
- Really Easy
- Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
Missing An Oven Rack Due To Plastic Fire In Our Oven. Plastic Melted Onto The Rack...Instead Of Taking The Time To Melt The Rest Off, My Husband Threw It Away =(
1 of 2 people
found this instruction helpful.
-
Nicole from Rogers, MN
- Really Easy
- Less than 15 mins
Bought a new one. . Three years later =)
Was this helpful?
Thank you for voting!
Racks would fall off of the tracks when the broiler was used
1 of 2 people
found this instruction helpful.
-
Andrew from Neptune, NJ
- Very Difficult
- More than 2 hours
I ordered new racks to see if they weere out of alignment. The new racks fell from its tracks after the broiler was heated. It seems the oven cabinet is expanding with the heat and the rack width does not compensate for that. The new racks did not solve the problem so I do not know what can be done next. Any shelf support would have to be
... Read more
heat resistent. Replacing the oven cabinet is not a good option and no gauantee it wouldn't continue with this stove.
Read less
Was this helpful?
Thank you for voting!