EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ESS349 Caloric Range - Instructions

All Instructions for the ESS349
91 - 105 of 136

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I needed to replace my burner pans.
  • Robert from Wilton, CA
  • Really Easy
  • Less than 15 mins
The Drip Pans are a cinch to replace with no tools necessary. The best part is that the Web Site is extremely easy to use, and the parts arrived two days after being ordered.
Was this helpful?
Thank you for voting!
drip pan were burnt out
  • Delroy from Miramar, FL
  • Really Easy
  • Less than 15 mins
simply remove the burner take out the drip pan and bowl individually. Install the new one and replace the burner. no tool was used.
Was this helpful?
Thank you for voting!
Drip bowls were all rusted.
  • Robin from Seneca, SC
  • Really Easy
  • Less than 15 mins
Removed old rusted drip bowls and put in the new ones. Very easy to do and needed no tools. It made my 25 plus Jenn Air look new again!
Was this helpful?
Thank you for voting!
The drip pans needed replacing.
  • Alison from Carnation, WA
  • Really Easy
  • Less than 15 mins
Put in the new drip pan -- which are really nice shiny ones.
Was this helpful?
Thank you for voting!
Dirty drip bowls
  • Paul from Carnegie, PA
  • Really Easy
  • Less than 15 mins
Just remove old bowls from range top and put new ones. That is all ... just super simple! :)
Was this helpful?
Thank you for voting!
Dirty drip bowl
  • Paul from Carnegie, PA
  • Really Easy
  • Less than 15 mins
Remove old drip bowl from the range and put a new one back.
Was this helpful?
Thank you for voting!
oven burner element blew out
  • Richard from Moscow, PA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
pulled out stove and disconected power. removed back panel and disconected wires and pulled element out from front of oven and installed new element.this stove is thirty years old. P.S. part was orderd thursday afternoon and it arrived the very next day. BEST SHIPPING SERVICE EVER and this was the week before christmas.
Was this helpful?
Thank you for voting!
old drip bowl was worn out
  • Richard from Germantown, MD
  • Really Easy
  • Less than 15 mins
new drip bowl fit perfectly and was a snap to install.
Was this helpful?
Thank you for voting!
burner not working
  • gene from kent, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
burner was shorting out replaced part works great
Was this helpful?
Thank you for voting!
burner would not heat up the connection was bad
  • Earl from Union Mills, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
loosened the screw holding the block pulled it out toget to wire cut it about 4 inches long followed the inst.with block kit and it was a breeze. burner working fine now should have did it sooner.
Was this helpful?
Thank you for voting!
Turned on oven to preheat, then heard a loud buzzing, saw sparks then a small flame.
  • Carol from Thompson, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
We turned off the power, removed the two screws on the little plate in the back of the element. Pulled the element out, removed the two wires (they just clip off/on). Reversed the process, attached the wires, slipped back into the holes, replaced the screws, turned power back on. Works perfectly.
Was this helpful?
Thank you for voting!
replace the cook stove's drip bowls instead of cleaning them
  • Dallas from Arlington, TX
  • Really Easy
  • Less than 15 mins
I removed the burners and then the older drip bowls of the cook stove--and then I put on the new drip bowls and put back on the burners. My mechanical skills were sufficient for the replacement of the drip bowls.
Was this helpful?
Thank you for voting!
The surface burner socket that the burner plugs into melted.
  • Gary from Chesapeake, VA
  • Easy
  • Less than 15 mins
  • Screw drivers
Cut the old wires off, removed the screw holding the clamp, installed the new parts. Problems I encountered were the wire nuts. They were too small for the wire gage of the replacement part and the original oven. I had larger wire nuts in my workshop. Also, why so many extra parts like the shrink wrap tubing, two metal clamps to hold t he socket, etc.
Was this helpful?
Thank you for voting!
I needed to replace to two 8* drip bowls on the kitchen range
  • Dallas from Arlington, TX
  • Really Easy
  • Less than 15 mins
(a) I took out (and threw away) two stained 8* chrome drip bowls on my kitchen range; (b) ti put in two new 8" chrome drip bowls on my kitchen range. I'm pleased that I was equal to the task.
Was this helpful?
Thank you for voting!
Stove needed new bowls
  • Karen from Kettering, OH
  • Really Easy
  • Less than 15 mins
Just dropped in
Was this helpful?
Thank you for voting!
All Instructions for the ESS349
91 - 105 of 136