EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ESR-348 Amana Range - Instructions

All Instructions for the ESR-348
16 - 30 of 98

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
My son turned on the oven, not realizing the salad spinner was inside.
3 of 4 people found this instruction helpful.
  • Donna from Orinda, CA
  • Really Easy
  • Less than 15 mins
I called the local appliance parts store and they said it would cost $60-80 and take a week to order. I paid $16 and received my rack in 2 days!
Was this helpful?
Thank you for voting!
Burner would not heat up.
2 of 2 people found this instruction helpful.
  • Nancy from Baldwinsville, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 screws, cut the wires, pulled the part out that the element plugs into. Replaced the old part with the new one and put the screws back in to hold it, reconnected the wires and plugged in the element. Turned stove on and Valaaaa! It was fixed in 10 minutes! Thanks for the great repair parts!
Was this helpful?
Thank you for voting!
Front Burner Would Not Heat
2 of 2 people found this instruction helpful.
  • GAIL from ORCHARD PARK, NY
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I cut the power to the circuit. Removed the burner and then unscrewed the old aluminum plate attached to the range top cover. Opened the topcover to access the wires. I cut the two wires being sure that I left enough length. I then slipped the two new wires with the brass contacts into the new black plastic holder until it locked . Reattached the new metal plate to the range cover, fed the wires through and snapped the new plastic holder into the aluminum plate. Secured wire ends with the ceramic wire nuts. Total time about 30 minutes.
Was this helpful?
Thank you for voting!
Screw hard to get off
2 of 2 people found this instruction helpful.
  • Lawrence from BROOKSVILLE, FL
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Drilled a pilot hole with a 1/16 th drill bit and tapped off screw head.
Was this helpful?
Thank you for voting!
burner inop
2 of 3 people found this instruction helpful.
  • Donald from Milford, MI
  • Easy
  • Less than 15 mins
  • Screw drivers
removed the plug that had burned up on one of the top burners, replaced it with a new plug purchased from parts select., it was quite easy ,I unpluged stove and raise the top exposing wiring for the burners cut the old plug wiring and connected the wires for the new plug with connectors and shrink tubing supplied in the repair kit easy a nd quick repair
Was this helpful?
Thank you for voting!
Missing oven rack
2 of 3 people found this instruction helpful.
  • Denise from Pittsburgh, PA
  • Really Easy
  • Less than 15 mins
Although this was not a repair I wanted to let you know your service was outstanding and the price quite reasonable. I am very happy to finally have a much needed second rack in my oven that was not there when I purchased my home. Thank You
Was this helpful?
Thank you for voting!
Range oven door switch need replaced
1 person found this instruction helpful.
  • Ruth from Gastonia, NC
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I raised the top of my Whirlpool Continuous Cleaning Canning Oven, then had to unscrew 3 screws and a lock nut, then raise top about 4 inches, so I could put my hand inside to unplug the wires to the switch, and push it through the hole in front, of oven. Then put the new switch through hole and plug in new switch. Then screw down top; and close lid. Part #866294
Was this helpful?
Thank you for voting!
N/A
1 person found this instruction helpful.
  • Gerry from Mackay, ID
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I followed the instructions provided.
Was this helpful?
Thank you for voting!
Drip Pans were stained and burned on.
1 person found this instruction helpful.
  • Sandra Collignon from SANTA CLAUS, IN
  • Really Easy
  • 30 - 60 mins
Replaced drip pan. Notch did not want to match the burner notch. Was a close fit bit with a little pressure made it work.
Was this helpful?
Thank you for voting!
wire came loose and shorted out
1 of 2 people found this instruction helpful.
  • Elizabeth from HOUSTON, TX
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Ordering the part online was easy. It arrived in a timely manner. I found a terrific video online showing how to install the terminal. It was so easy. Thank you for the great instructional video.
Was this helpful?
Thank you for voting!
Broken hinge on oven door
4 of 11 people found this instruction helpful.
  • Robert from Morgan Hill, CA
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
I ordered the part and it was at my door in 2 days. I ordered the part on Wednesday thinking I would install it on the weekend after next. The part showed up on Friday. That was amazing considering I didn't sellect expeidited delivery. I didn't have a manual and have never tried this before so grade my attempt on a curve please. I started by unscrewing the screws closest to the hinge but quickly migrated to the entire face of the range. Pulled the range out and started unscrewing the screws on the side, and then the back. Figuring nothing was coming off and I still couldn't get to the hinge I stopped and regrouped. That's when my wife asked if she could help. I guess I looked distressed. By this time I had removed the drawer and had the range on it's back in the middle of the kitchen with little bowls of screws everywhere. My wife picked up the new hinge and looked it over. Then she started playing with the old hinge which was loose, but I couldn't get it out. She realized that you can remove the old hinge and install the new hinge without taking the whole thing apart. Where was she 30 minutes ago? The hinges came out and the new ones went it in about 10 minutes. It took me another 20 minutes to put back all of the screws I had taken off unnecessarily. Sometimes use your brains instead of a screwdriver. I have the best wife ever!
Was this helpful?
Thank you for voting!
Racks would fall off of the tracks when the broiler was used
1 of 2 people found this instruction helpful.
  • Andrew from Neptune, NJ
  • Very Difficult
  • More than 2 hours
I ordered new racks to see if they weere out of alignment. The new racks fell from its tracks after the broiler was heated. It seems the oven cabinet is expanding with the heat and the rack width does not compensate for that. The new racks did not solve the problem so I do not know what can be done next. Any shelf support would have to be heat resistent. Replacing the oven cabinet is not a good option and no gauantee it wouldn't continue with this stove.
Was this helpful?
Thank you for voting!
Replace oven racks
2 of 5 people found this instruction helpful.
  • Gregory from Davenport, IA
  • Really Easy
  • Less than 15 mins
Very simple process of just ensuring you have the correct size racks and remove the old racks and replace them with the new ones.
Having ordered a lot of things on the internet, I am very pleased with using Part select and would "highly" recommend them to all!!
Was this helpful?
Thank you for voting!
Simple - needed to replace the drip pans on the stove between tenants in a rental apartment
1 of 2 people found this instruction helpful.
  • Tama from Pacific Grove, CA
  • Really Easy
  • Less than 15 mins
This wasn't much of a repair -- rather a replacement of a simple abused part. At the same time, PartSelect allowed me to order what I needed after two failed attempts to buy replacements that would fit the range. I'll remember PartSelect if we need parts for other older appliances in the rental units.
Was this helpful?
Thank you for voting!
Missing An Oven Rack Due To Plastic Fire In Our Oven. Plastic Melted Onto The Rack...Instead Of Taking The Time To Melt The Rest Off, My Husband Threw It Away =(
1 of 2 people found this instruction helpful.
  • Nicole from Rogers, MN
  • Really Easy
  • Less than 15 mins
Bought a new one. . Three years later =)
Was this helpful?
Thank you for voting!
All Instructions for the ESR-348
16 - 30 of 98